CAD CAM EDM DRO - Yahoo Group Archive

Many Thanks to the group & "Z axis counterweight"

Posted by mjf462001
on 2002-09-05 20:26:59 UTC
With all of your help and advise I have retrofitted
a 9x42 Enco knee mill. It has taken almost a year to
get this far. The setup is a 600 in oz servo/ EMC / gecko drive.
The x and y axis are working, and with any luck I will have the
z axis working soon. The excitement is incredible!!!

Again I must say that this has been made possible by the great
generousity and deep knowledge of the group. Thank You!


I have rigged the mill with a pully and counterweight to
help my little servos lift the knee. Pictures are available
if anyone is interested.

If my memory serves me, it seems that someone calculated the
weight of the knee assembly on a 9 x 42 mill. Does anyone recall?

Matthew

Discussion Thread

mjf462001 2002-09-05 20:26:59 UTC Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 04:54:27 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" Larry Ragan 2002-09-06 07:19:25 UTC RE: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" Peter 2002-09-06 07:21:37 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 07:49:38 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 08:00:25 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" bsptrades 2002-09-06 08:20:30 UTC Re: Mcmaster peteryco 2002-09-07 06:42:02 UTC Re: Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-08 05:18:37 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" mjf462001 2002-09-10 06:58:52 UTC Re: Many Thanks to the group & "Z axis counterweight" Jeff Hamilton 2002-09-14 14:47:10 UTC Sargon Scale Pickup Parts Jon Elson 2002-09-14 22:02:36 UTC Re: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts Jeff Hamilton 2002-09-17 07:22:47 UTC RE: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts