CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"

Posted by aaalfano
on 2002-09-06 04:54:27 UTC
Hi,
I think about 500 pounds.
AL
> With all of your help and advise I have retrofitted
> a 9x42 Enco knee mill. It has taken almost a year to
> get this far. The setup is a 600 in oz servo/ EMC / gecko drive.
> The x and y axis are working, and with any luck I will have the
> z axis working soon. The excitement is incredible!!!
>
> Again I must say that this has been made possible by the great
> generousity and deep knowledge of the group. Thank You!
>
>
> I have rigged the mill with a pully and counterweight to
> help my little servos lift the knee. Pictures are available
> if anyone is interested.
>
> If my memory serves me, it seems that someone calculated the
> weight of the knee assembly on a 9 x 42 mill. Does anyone recall?
>
> Matthew
>
>

Discussion Thread

mjf462001 2002-09-05 20:26:59 UTC Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 04:54:27 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" Larry Ragan 2002-09-06 07:19:25 UTC RE: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" Peter 2002-09-06 07:21:37 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 07:49:38 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-06 08:00:25 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" bsptrades 2002-09-06 08:20:30 UTC Re: Mcmaster peteryco 2002-09-07 06:42:02 UTC Re: Many Thanks to the group & "Z axis counterweight" aaalfano 2002-09-08 05:18:37 UTC Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight" mjf462001 2002-09-10 06:58:52 UTC Re: Many Thanks to the group & "Z axis counterweight" Jeff Hamilton 2002-09-14 14:47:10 UTC Sargon Scale Pickup Parts Jon Elson 2002-09-14 22:02:36 UTC Re: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts Jeff Hamilton 2002-09-17 07:22:47 UTC RE: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts