RE: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts
Posted by
Jeff Hamilton
on 2002-09-17 07:22:47 UTC
Jon,
Thanks for the help. They are IR and 1 LED has gone bad, I bought some new
IR LEDs from Digi-Key and will try and repair the unit myself.
Jeff Hamilton
-----Original Message-----
From: elson@... [mailto:elson@...]On
Behalf Of Jon Elson
Sent: Sunday, September 15, 2002 1:14 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts
Jeff Hamilton wrote:
the picture.
But, I figured it out and saw the pics, anyway.
These are almost certainly IR LEDs. It is a rather unusual package, looks
like
surface mount, and square. You might look in the Digi-Key catalog and see
what
they have. They may have something that is comparable. Do any of the LEDs
light up when you power the scale on? If not, then they must be IR. If
they light
up bright red, then they may be visible red LEDs. If they light up just a
little red,
they may be IR with some visible red emission (not uncommon). Don't stare
into
them, you can hurt your eyes with intense IR output.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Thanks for the help. They are IR and 1 LED has gone bad, I bought some new
IR LEDs from Digi-Key and will try and repair the unit myself.
Jeff Hamilton
-----Original Message-----
From: elson@... [mailto:elson@...]On
Behalf Of Jon Elson
Sent: Sunday, September 15, 2002 1:14 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts
Jeff Hamilton wrote:
> Hello,me
>
> I am in need of a pickup for a Sargon TX350 scale or if anyone can tell
> were to get the parts I think I can repair it. One of the light emittinganyone
> parts appears to be bad, it doesn't readout the same as the rest. If
> knows were I can buy the parts or someone to do the repairs I wouldat
> appreciate the help. I have place pictures of the pickup and sensor on my
> website so you can see the defective part ( it has a blue arrow pointing
> it).You apparently have a "\" where you need a "/" in the page that brings up
> http://www.clockmaker.com/Sensor/index.html
the picture.
But, I figured it out and saw the pics, anyway.
These are almost certainly IR LEDs. It is a rather unusual package, looks
like
surface mount, and square. You might look in the Digi-Key catalog and see
what
they have. They may have something that is comparable. Do any of the LEDs
light up when you power the scale on? If not, then they must be IR. If
they light
up bright red, then they may be visible red LEDs. If they light up just a
little red,
they may be IR with some visible red emission (not uncommon). Don't stare
into
them, you can hurt your eyes with intense IR output.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
mjf462001
2002-09-05 20:26:59 UTC
Many Thanks to the group & "Z axis counterweight"
aaalfano
2002-09-06 04:54:27 UTC
Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
Larry Ragan
2002-09-06 07:19:25 UTC
RE: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
Peter
2002-09-06 07:21:37 UTC
Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
aaalfano
2002-09-06 07:49:38 UTC
Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
aaalfano
2002-09-06 08:00:25 UTC
Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
bsptrades
2002-09-06 08:20:30 UTC
Re: Mcmaster
peteryco
2002-09-07 06:42:02 UTC
Re: Many Thanks to the group & "Z axis counterweight"
aaalfano
2002-09-08 05:18:37 UTC
Re: [CAD_CAM_EDM_DRO] Many Thanks to the group & "Z axis counterweight"
mjf462001
2002-09-10 06:58:52 UTC
Re: Many Thanks to the group & "Z axis counterweight"
Jeff Hamilton
2002-09-14 14:47:10 UTC
Sargon Scale Pickup Parts
Jon Elson
2002-09-14 22:02:36 UTC
Re: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts
Jeff Hamilton
2002-09-17 07:22:47 UTC
RE: [CAD_CAM_EDM_DRO] Sargon Scale Pickup Parts