Re: Belt vs. Direct Drive
Posted by
jeffalanp <xylotex@h...
on 2003-01-03 18:43:49 UTC
Hi Chris,
I mention the problem with the rubber because some that I have that
used to fit snugly, now have a little play between the hub and the
rubber sleeve. I don't think the metal shrank, so it must be the
rubber. I wasn't really considering windup, rather, a real backlash
problem due to ill-fit.
Jeff
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Chris Baugher
<cbaugher_yahoo@b...> wrote:
I mention the problem with the rubber because some that I have that
used to fit snugly, now have a little play between the hub and the
rubber sleeve. I don't think the metal shrank, so it must be the
rubber. I wasn't really considering windup, rather, a real backlash
problem due to ill-fit.
Jeff
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Chris Baugher
<cbaugher_yahoo@b...> wrote:
> On Fri, 3 Jan 2003, jeffalanp <xylotex@h...> wrote:beam
> > Hi Chris,
> > I have some "Zinc hub and neoprene sleeve coupling" (rubber
> > couplings)and I get a some backlash from them. This will be more
> > noticable as the rubber dries out and doesn't fit on the hub as
> > nicely as it does when it is new and fresh. I don't think you are
> > going to get nearly (if any really) the slop from a nice helical
> > coupling (it's all one piece). On the other hand, the rubberones seem
> > couplings are really cheap!
>
> I'm only curious because I have a few of both kinds. The rubber
> to have just a bit of windup but it would take a fair amount ofload on
> the screw to make it significant.
>
> C|
Discussion Thread
dennis_kramer2001 <dennis.kramer@a...
2003-01-02 17:14:08 UTC
Belt vs. Direct Drive
Robert Campbell
2003-01-02 17:51:28 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Doug Fortune
2003-01-02 18:51:25 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Chris Baugher
2003-01-02 19:18:13 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Doug Fortune
2003-01-03 01:11:21 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Tony Jeffree <tony@j...
2003-01-03 01:17:12 UTC
Re: Belt vs. Direct Drive
jeffalanp <xylotex@h...
2003-01-03 01:19:14 UTC
Re: Belt vs. Direct Drive
torsten98001 <torsten@g...
2003-01-03 03:02:04 UTC
Re: Belt vs. Direct Drive
bjammin@i...
2003-01-03 07:26:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Marv Frankel
2003-01-03 08:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Garry & Maxine Foster
2003-01-03 08:27:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
CL
2003-01-03 10:58:51 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
CL
2003-01-03 11:23:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
alex
2003-01-03 11:34:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Tim Goldstein
2003-01-03 11:46:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Chris Baugher
2003-01-03 12:13:01 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Chris Baugher
2003-01-03 18:31:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
jeffalanp <xylotex@h...
2003-01-03 18:43:49 UTC
Re: Belt vs. Direct Drive
Tony Jeffree
2003-01-03 21:51:52 UTC
Re: Re: Belt vs. Direct Drive
Tony Jeffree
2003-01-03 22:14:42 UTC
Re: Re: Belt vs. Direct Drive
bjammin@i...
2003-01-04 00:00:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Tim Goldstein
2003-01-04 10:38:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-04 16:24:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Ron Kline
2003-01-04 16:58:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-04 17:33:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
jwalters
2003-01-04 18:13:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Dave Kowalczyk <dkowalcz@d...
2003-01-04 18:53:19 UTC
Re: Belt vs. Direct Drive
Ron Kline
2003-01-04 20:11:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-04 22:26:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-05 15:45:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-05 23:12:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-08 08:12:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-08 23:26:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive