Re: [CAD_CAM_EDM_DRO] Gecko wiring question

Jerry,
I need to build a power supply with about the same output, but how
did you get over 80 volts, from two 24 volt transformers? Would you be
willing to share the schematic, and bill of materials?

Thanks,

Marv Frankel
Los Angeles

----- Original Message -----
From: <jerry@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 17, 2003 6:49 AM
Subject: [CAD_CAM_EDM_DRO] Gecko wiring question


> Built new power supply last night. after testing I getting 81.1 volts
> (high line voltage,122) instead of 67.8 volts like I caculated.
> the 81.1 volts was measured across the cap.
> Will this extra 1.1 volt kill my geckos?
> or as soon as I hook up the geckos and motor the voltage should fall?
>
>
> Jerry
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>