Re: rolled ball screws
Posted by
Deon Styger
on 2003-01-27 05:26:55 UTC
torsten98001 wrote:
http://www.rockfordballscrew.com/images/pdfs/manual.pdf there is also a
website at http://www.mmanrow.20m.com/anti_backlash_nuts.htm explaining the
concept in detail.
Regards,
Deon Styger.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.445 / Virus Database: 250 - Release Date: 21/01/2003
> A adjustable fitting between the two nuts needs to beTake a look at the Rockford manual
> designed to clock the rotation of the two nuts so they
> are prevented to rotate towards each other.
> This needs to be adjusted to still allow for the 0.5 inch of
> pitch varyiation introduced by the screw to prevent
> binding up.
> At the same time the second Nut would still have to be allowed
> to float in the axial direction in order to allow a
> spring of preload rating force to ensure a continual force
> to be aplied withing the range of the screw.
>
> How could this mechanism be designed?
> Seams like a real challange to me, what I have looked at
> so far either dose the rotational clocking or the
> spring action design, have not seen both yet?
> Anybody have a design that works?
http://www.rockfordballscrew.com/images/pdfs/manual.pdf there is also a
website at http://www.mmanrow.20m.com/anti_backlash_nuts.htm explaining the
concept in detail.
Regards,
Deon Styger.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.445 / Virus Database: 250 - Release Date: 21/01/2003
Discussion Thread
tsalaff <tacman@s...
2003-01-07 10:09:43 UTC
rolled ball screws
Les Watts
2003-01-07 14:38:06 UTC
Re: [CAD_CAM_EDM_DRO] rolled ball screws
torsten98001 <torsten@g...
2003-01-07 15:12:06 UTC
Re: rolled ball screws
bjammin@i...
2003-01-07 18:22:03 UTC
Re: [CAD_CAM_EDM_DRO] rolled ball screws
sparkazoid2001 <mark@c...
2003-01-07 18:51:43 UTC
Re: rolled ball screws
ths992001 <tom@t...
2003-01-07 19:05:15 UTC
Re: rolled ball screws
Jon Elson
2003-01-07 23:08:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
bjammin@i...
2003-01-08 04:01:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Les Watts
2003-01-08 06:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Marcus & Eva
2003-01-08 07:43:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
C.S. Mo
2003-01-08 07:55:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Les Watts
2003-01-08 11:29:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Carlos Guillermo
2003-01-08 11:47:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Les Watts
2003-01-08 15:02:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
tsalaff <tacman@s...
2003-01-08 16:16:44 UTC
Re: rolled ball screws
Les Watts
2003-01-08 16:46:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
jim davies
2003-01-08 19:19:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Marcus & Eva
2003-01-08 19:59:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Hoyt McKagen
2003-01-09 04:41:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Les Watts
2003-01-09 05:42:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Marcus & Eva
2003-01-09 19:40:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
tsalaff <tacman@s...
2003-01-10 07:46:08 UTC
Re: rolled ball screws
skykotechnologies <skykotechnologies@y...
2003-01-10 08:10:06 UTC
Re: rolled ball screws
Tim Goldstein
2003-01-10 08:22:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Dan Mauch
2003-01-10 08:38:58 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Eugene McCully
2003-01-10 08:51:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Askew, Jason
2003-01-10 08:52:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
fozzyber <jerry@o...
2003-01-10 09:00:27 UTC
Re: rolled ball screws
tsalaff <tacman@s...
2003-01-10 09:49:27 UTC
Re: rolled ball screws
Askew, Jason
2003-01-10 09:51:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
C.S. Mo
2003-01-10 09:51:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Jon Elson
2003-01-10 10:04:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
tsalaff <tacman@s...
2003-01-10 13:57:00 UTC
Re: rolled ball screws
Jon Elson
2003-01-10 23:03:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
elmo14226 <elmo14226@y...
2003-01-24 10:49:29 UTC
Re: rolled ball screws
torsten98001 <torsten@g...
2003-01-26 05:30:21 UTC
Re: rolled ball screws
Yesamazza@a...
2003-01-26 11:07:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
Greg Jackson
2003-01-26 13:33:36 UTC
RE: [CAD_CAM_EDM_DRO] Re: rolled ball screws
mayfieldtm <mayfiet@i...
2003-01-26 18:47:55 UTC
Re: rolled ball screws
torsten98001 <torsten@g...
2003-01-26 20:23:42 UTC
Re: rolled ball screws
torsten98001 <torsten@g...
2003-01-26 21:24:51 UTC
Re: rolled ball screws
Deon Styger
2003-01-27 05:26:55 UTC
Re: rolled ball screws
ballendo <ballendo@y...
2003-01-27 07:47:35 UTC
Re: rolled ball screws
ballendo <ballendo@y...
2003-01-27 08:04:48 UTC
Re: rolled ball screws
torsten98001 <torsten@g...
2003-01-27 12:38:06 UTC
Re: rolled ball screws
aussiedude
2003-01-27 13:04:59 UTC
Cable carriers
torsten98001 <torsten@g...
2003-01-27 14:40:54 UTC
Re: rolled ball screws
Hoyt McKagen
2003-01-27 20:03:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: rolled ball screws
ballendo <ballendo@y...
2003-01-31 05:18:38 UTC
Re: rolled ball screws
torsten98001 <torsten@g...
2003-01-31 13:56:04 UTC
Re: rolled ball screws