Re: Help - G340 problem ?

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "deanc500
<deancouillard@s...>" <deancouillard@s...> wrote:

> Hi, sounds like either there is a problem with the encoder, or there
> is electrical noise on the ground circuit. If can try another motor,
> see if you can rule out the encoder. Be sure the +, -, A , and B are
> correctly wired.

I've double checked.

Are you powering the encoder from the Gecko or from a

> separate 5V supply?

From the Gecko.


But I don't understand that if I put step and dir to ground or to +5V,
one of this configurations should simply stop everthing. Even if the
encoder is damaged ? Or no ?

Thanks for the reply.