CAD CAM EDM DRO - Yahoo Group Archive

Re: cnc router plans

on 2003-02-25 13:44:27 UTC
You will not find "good" plans for free. I just finished mine last
week and this past weekend made my first cuts. I got the plans from
http://www.campbelldesigns.com When done this machine is very hearty
and will do most everything you want if building furniture. I also
believe it will last quite a long time based on it's design. I am
using mine for custom trophies. "Including engraving" It is very
accurate if you build it right. This was the best I found after doing
the research.

Bruce







--- In CAD_CAM_EDM_DRO@yahoogroups.com, "shrongk2000
<armstrongsmbl@a...>" <armstrongsmbl@a...> wrote:
> hi
> my husband and I wish to start a furniture bussines and rather than
> buying a cnc router he wishes to build one. We have looked at some
> sites and the cost involved is too high as we are in Australia and
> the transfer in money is sooo expensive.
> We have had no luck in locating plans here and every one thinks you
> can not make one. My husband is a mech fitter and works with large
> machines repairing and creating new parts so making a cnc router
will
> not be too hard.
> So if anybody has plans out there on how to build a cnc router (
> free ) I will be ever so gratefull. So please email me and we can
go
> from there.
> thanks
> sharon

Discussion Thread

Bob Campbell 2001-09-02 17:40:18 UTC cnc router plans foxacoustics 2002-08-03 08:36:20 UTC cnc router plans cadcambee 2002-08-03 11:56:43 UTC Re: cnc router plans cadcambee 2002-08-03 11:59:11 UTC Re: cnc router plans Chris L 2002-08-03 12:15:00 UTC Re: [CAD_CAM_EDM_DRO] cnc router plans shrongk2000 <armstrongsmbl@a... 2003-02-25 07:03:10 UTC cnc router plans fast25hydro <bbirling@e... 2003-02-25 13:44:27 UTC Re: cnc router plans Bernard R <bwjarandall@c... 2003-02-25 15:05:03 UTC Re: cnc router plans Alan Trest <cncprojects0@h... 2003-02-25 16:55:24 UTC Re: cnc router plans stepper747 <gigilal@y... 2003-02-25 17:25:49 UTC Re: cnc router plans ajv2803959 <antonio-ximenez@t... 2003-02-26 01:41:48 UTC Re: cnc router plans willard5612000 <w.higdon@a... 2003-02-26 09:43:08 UTC Re: cnc router plans turbulatordude <davemucha@j... 2003-02-26 10:28:25 UTC Re: cnc router plans Randy Gordon-Gilmore 2003-02-26 10:40:40 UTC Re: cnc router plans Bill Higdon 2003-02-26 11:25:15 UTC Re: [CAD_CAM_EDM_DRO] Re: cnc router plans Randy Gordon-Gilmore 2003-02-26 12:29:16 UTC Solidworks viewer, was Re: cnc router plans Garry & Maxine Foster 2003-02-26 16:55:17 UTC Re: [CAD_CAM_EDM_DRO] Re: cnc router plans dakota8833 <dakota8833@b... 2003-02-26 18:47:18 UTC Re: cnc router plans / Poor Man's Router Bill Higdon 2003-02-26 20:49:51 UTC Re: [CAD_CAM_EDM_DRO] Re: cnc router plans / Poor Man's Router Larry Edinger 2003-02-26 21:29:18 UTC Re: [CAD_CAM_EDM_DRO] Re: cnc router plans / Poor Man's Router dakota8833 <dakota8833@b... 2003-02-26 21:45:23 UTC Re: cnc router plans / Poor Man's Router