Re: [CAD_CAM_EDM_DRO] Re: cnc router plans / Poor Man's Router

----- Original Message -----
From: <dakota8833@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 26, 2003 6:47 PM
Subject: [CAD_CAM_EDM_DRO] Re: cnc router plans / Poor Man's Router


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "ajv2803959
> <antonio-ximenez@t...>" <antonio-ximenez@t...> wrote:
> > Hi, have a look the next link
> > http://groups.yahoo.com/group/CAD_CAM_EMC/files/Millrouter%20/
> > You must be member
> > Plans are free and the guy has designed want to make wood working.
> >
> > Best Regards
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "shrongk2000
> <armstrongsmbl@a...>" <armstrongsmbl@a...> wrote:
> > > hi
> > > my husband and I wish to start a furniture bussines and rather than
> > > buying a cnc router he wishes to build one. We have looked at some
> > > sites and the cost involved is too high as we are in Australia and
> > > the transfer in money is sooo expensive.
> > > We have had no luck in locating plans here and every one thinks
>
>
> The SolidWorks files are there for anyone to get a rotating 3D look at
> the design not to copy it to a tee. I should point out that some
> changes have been made during the build ,.. if you look at the gif
> picts and then at the photo's you will see that I redesigned the
> gantry at the Y rails to get the full 50" of travel without changing
> the width of the gantry. The Y servo can flipped 180 and belt driven
> so it doesn't stick out. NOTE : I have not updated in files. I wanted
> to wait and run the machine throughly before I do. As for plans ,....
> well that's a lot of work, ...just don't if I have the time to write
> up a step by step.
>
> Frank
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>