Re: cnc router plans / Poor Man's Router

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "ajv2803959
<antonio-ximenez@t...>" <antonio-ximenez@t...> wrote:

> Hi, have a look the next link
> http://groups.yahoo.com/group/CAD_CAM_EMC/files/Millrouter%20/
> You must be member
> Plans are free and the guy has designed want to make wood working.
>
> Best Regards
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "shrongk2000

<armstrongsmbl@a...>" <armstrongsmbl@a...> wrote:

> > hi
> > my husband and I wish to start a furniture bussines and rather than
> > buying a cnc router he wishes to build one. We have looked at some
> > sites and the cost involved is too high as we are in Australia and
> > the transfer in money is sooo expensive.
> > We have had no luck in locating plans here and every one thinks

The SolidWorks files are there for anyone to get a rotating 3D look at
the design not to copy it to a tee. I should point out that some
changes have been made during the build ,.. if you look at the gif
picts and then at the photo's you will see that I redesigned the
gantry at the Y rails to get the full 50" of travel without changing
the width of the gantry. The Y servo can flipped 180 and belt driven
so it doesn't stick out. NOTE : I have not updated in files. I wanted
to wait and run the machine throughly before I do. As for plans ,....
well that's a lot of work, ...just don't if I have the time to write
up a step by step.

Frank