CAD CAM EDM DRO - Yahoo Group Archive

Re: Dyna-Myte 2400

on 2003-02-28 20:27:45 UTC
Details of a Dyna-Myte conversion can be found at www.route-a-
bout.com under the "how it started" link. Rick West designed the
motor mounts, his email is on the bottom of the main page.

timing belts and pulleys are the way to go. The original gears
are much to weak for a nema23 motor.


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "William Scalione"
<wscalione@n...> wrote:
> I have an old Dyna-Myte 2400 CNC mill that has had the motors and
all
> electronics removed from it. It seems to be a pretty nice machine,
although
> somewhat small. Has anyone done a retrofit of one of these? I plan
on using
> servos and Gecko 320 or 340 drives. I believe the screws were
driven by the
> stepper motors through some sort of a gear arrangement, but since I
don't
> have the original parts, I don't know. Looks pretty straight
forward to
> build some motor mounts and drive the screws with timing belts and
pulleys,
> but I thought I'd ask in case someone knows some gotchas with these
> machines, or if someone has motor mounts allready designed they
would be
> willing to share.
>
> Bill

Discussion Thread

William Scalione 2003-02-28 10:24:04 UTC Dyna-Myte 2400 RichD 2003-02-28 16:38:18 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 aintknowwayzzsa <yonsi@s... 2003-02-28 20:27:45 UTC Re: Dyna-Myte 2400 johnseale <johnseale@y... 2003-02-28 20:28:25 UTC Re: Dyna-Myte 2400 RichD 2003-02-28 20:59:05 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 William Scalione 2003-02-28 21:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400 William Scalione 2003-02-28 21:52:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400 William Scalione 2003-02-28 22:05:03 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 Dan Mauch 2003-03-01 07:12:46 UTC RE: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400