CAD CAM EDM DRO - Yahoo Group Archive

Re: Dyna-Myte 2400

on 2003-02-28 20:28:25 UTC
Bill, You might look at the Dyna-Myte 2400 conversion kits offered
by AH-HA at http://www.ahha.com/newitems.htm

john


-- In CAD_CAM_EDM_DRO@yahoogroups.com, "William Scalione"
<wscalione@n...> wrote:
> I have an old Dyna-Myte 2400 CNC mill that has had the motors and
all
> electronics removed from it. It seems to be a pretty nice machine,
although
> somewhat small. Has anyone done a retrofit of one of these? I plan
on using
> servos and Gecko 320 or 340 drives. I believe the screws were
driven by the
> stepper motors through some sort of a gear arrangement, but since I
don't
> have the original parts, I don't know. Looks pretty straight
forward to
> build some motor mounts and drive the screws with timing belts and
pulleys,
> but I thought I'd ask in case someone knows some gotchas with these
> machines, or if someone has motor mounts allready designed they
would be
> willing to share.
>
> Bill

Discussion Thread

William Scalione 2003-02-28 10:24:04 UTC Dyna-Myte 2400 RichD 2003-02-28 16:38:18 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 aintknowwayzzsa <yonsi@s... 2003-02-28 20:27:45 UTC Re: Dyna-Myte 2400 johnseale <johnseale@y... 2003-02-28 20:28:25 UTC Re: Dyna-Myte 2400 RichD 2003-02-28 20:59:05 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 William Scalione 2003-02-28 21:37:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400 William Scalione 2003-02-28 21:52:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400 William Scalione 2003-02-28 22:05:03 UTC Re: [CAD_CAM_EDM_DRO] Dyna-Myte 2400 Dan Mauch 2003-03-01 07:12:46 UTC RE: [CAD_CAM_EDM_DRO] Re: Dyna-Myte 2400