CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter

Posted by Nigel Bailey
on 2003-03-11 08:37:44 UTC
many thanks, will check out,
nig,
ps, I'm not the guy who started the thread, but I'm still very interested!

-----Original Message-----
From: alex [mailto:telecomt@...]
Sent: Tuesday, March 11, 2003 3:31 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
counter


Their web page:
www.star.net/people/~mvs
Regards, Alex
----- Original Message -----
From: Nigel Bailey <nigel.bailey@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 11, 2003 6:04 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter


> Had a search as promised,
> best url I found so far was
>
> http://www.dontronics.com/dt006_programming.html
>
> which includes links to a free basic compiler (code limited to 2K which is
> quite big really ) and details of a parallel port based
in-system-programmer
> (3 resistors!) example code etc....
>
> Atmel AVRs do give you a lot of power per £, slightly less robust than the
> pic but things like PWM available and the onboard comparator are lovely
for
> motor control.
>
> Nig
>
> -----Original Message-----
> From: alex [mailto:telecomt@...]
> Sent: Monday, March 10, 2003 4:36 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
> counter
>
>
> Nig,
> MVS @508-792-9507 sells Atmel with Basic.
> Initially they called it "pic-killer". Microchip took them to court,
> now its called "single chip computer".
> Alex
> ----- Original Message -----
> From: Nigel Bailey <nigel.bailey@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, March 10, 2003 11:27 AM
> Subject: RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
counter
>
>
> > At risk of going OT with this thread, but...
> >
> > Nothing wrong with atmel at all (I use them all the time for stepper
> > control) but you can't program them quite so directly in basic, there
may
> be
> > a compiler available, but I don't think there is a freeware one (I'll
have
> a
> > search), and you need a programmer too, whereas the programmer for the
> stamp
> > is just a couple of wires off the parallel port.
> >
> > A lot of pitfalls for a non-micro person
> >
> > Nig
> >
> > -----Original Message-----
> > From: alex [mailto:telecomt@...]
> > Sent: Monday, March 10, 2003 2:57 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
> > counter
> >
> >
> > What's wrong with Atmel? 100 times more power.
> > Alex
> > ----- Original Message -----
> > From: Nigel Bailey <nigel.bailey@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Monday, March 10, 2003 5:31 AM
> > Subject: RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
> counter
> >
> >
> > > They may have corrected the problem now, but I had some problems about
6
> > > years ago with basic stamps losing their program when there was a
power
> > > "brown-out" I ended up using an external reset chip to ensure the
stamp
> > was
> > > held in reset when power dipped. But apart from that, GREAT devices,
and
> > so
> > > easy to program.
> > > Led on to me using the microchip PIC chips, and learning assembler...
> > total
> > > career change...
> > > Nig
> > >
> > > -----Original Message-----
> > > From: Pablo Roufogalis L. [mailto:proufo@...]
> > > Sent: Sunday, March 09, 2003 4:07 PM
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
counter
> > >
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Larry Edington"
> <ledington@a...>
> > > wrote:
> > > > If you must program in Basic you probably should take a look at a
> Basic
> > > > Stamp from Parallax or one of the products that work the same way.
> > >
> > > WOW! Basic Stamp seems to have all the building blocks that I might
ever
> > > need.
> > >
> > > The Basic Micro site has very little information for download so Basic
> > Stamp
> > > seems to be the right choice for me now.
> > >
> > > Many thanks!
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > > timg@...
> > > Moderator: pentam@... indigo_red@... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it
> > if
> > > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> > > sister site to the CCED group, as many of the same members are there,
> for
> > OT
> > > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > > Moderator: pentam@... indigo_red@... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> > sister site to the CCED group, as many of the same members are there,
for
> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there,
for
> OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Pablo Roufogalis L. 2003-03-08 17:23:48 UTC Setup for stepping on revolution counter Larry Edington 2003-03-08 23:18:18 UTC Re: [CAD_CAM_EDM_DRO] Setup for stepping on revolution counter Pablo Roufogalis L. 2003-03-09 05:40:33 UTC Re: Setup for stepping on revolution counter Pablo Roufogalis L. 2003-03-09 08:07:10 UTC Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-10 02:37:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-10 07:19:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-10 08:37:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-10 08:58:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter JanRwl@A... 2003-03-10 09:28:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Jon Elson 2003-03-10 10:35:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Carl Mikkelsen 2003-03-10 11:06:20 UTC [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Matt Shaver 2003-03-10 12:02:48 UTC Re: [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Carl Mikkelsen 2003-03-10 13:26:19 UTC Re: [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Pablo Roufogalis L. 2003-03-10 19:08:28 UTC Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-11 03:07:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-11 07:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-11 07:54:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-11 08:37:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-13 07:22:11 UTC re: using optical mouse for DRO / servo feedback Jon Elson 2003-03-13 09:57:15 UTC Re: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback Nigel Bailey 2003-03-14 01:52:06 UTC RE: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback Jon Elson 2003-03-14 09:31:10 UTC Re: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback