CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter

Posted by alex
on 2003-03-10 08:58:33 UTC
Nig,
MVS @508-792-9507 sells Atmel with Basic.
Initially they called it "pic-killer". Microchip took them to court,
now its called "single chip computer".
Alex
----- Original Message -----
From: Nigel Bailey <nigel.bailey@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, March 10, 2003 11:27 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter


> At risk of going OT with this thread, but...
>
> Nothing wrong with atmel at all (I use them all the time for stepper
> control) but you can't program them quite so directly in basic, there may
be
> a compiler available, but I don't think there is a freeware one (I'll have
a
> search), and you need a programmer too, whereas the programmer for the
stamp
> is just a couple of wires off the parallel port.
>
> A lot of pitfalls for a non-micro person
>
> Nig
>
> -----Original Message-----
> From: alex [mailto:telecomt@...]
> Sent: Monday, March 10, 2003 2:57 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
> counter
>
>
> What's wrong with Atmel? 100 times more power.
> Alex
> ----- Original Message -----
> From: Nigel Bailey <nigel.bailey@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, March 10, 2003 5:31 AM
> Subject: RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution
counter
>
>
> > They may have corrected the problem now, but I had some problems about 6
> > years ago with basic stamps losing their program when there was a power
> > "brown-out" I ended up using an external reset chip to ensure the stamp
> was
> > held in reset when power dipped. But apart from that, GREAT devices, and
> so
> > easy to program.
> > Led on to me using the microchip PIC chips, and learning assembler...
> total
> > career change...
> > Nig
> >
> > -----Original Message-----
> > From: Pablo Roufogalis L. [mailto:proufo@...]
> > Sent: Sunday, March 09, 2003 4:07 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Larry Edington"
<ledington@a...>
> > wrote:
> > > If you must program in Basic you probably should take a look at a
Basic
> > > Stamp from Parallax or one of the products that work the same way.
> >
> > WOW! Basic Stamp seems to have all the building blocks that I might ever
> > need.
> >
> > The Basic Micro site has very little information for download so Basic
> Stamp
> > seems to be the right choice for me now.
> >
> > Many thanks!
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there,
for
> OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Pablo Roufogalis L. 2003-03-08 17:23:48 UTC Setup for stepping on revolution counter Larry Edington 2003-03-08 23:18:18 UTC Re: [CAD_CAM_EDM_DRO] Setup for stepping on revolution counter Pablo Roufogalis L. 2003-03-09 05:40:33 UTC Re: Setup for stepping on revolution counter Pablo Roufogalis L. 2003-03-09 08:07:10 UTC Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-10 02:37:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-10 07:19:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-10 08:37:45 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-10 08:58:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter JanRwl@A... 2003-03-10 09:28:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Jon Elson 2003-03-10 10:35:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Carl Mikkelsen 2003-03-10 11:06:20 UTC [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Matt Shaver 2003-03-10 12:02:48 UTC Re: [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Carl Mikkelsen 2003-03-10 13:26:19 UTC Re: [CAD_CAM_EDM_DRO] Programmable deviced (was: Setup for stepping on revolution counter) Pablo Roufogalis L. 2003-03-10 19:08:28 UTC Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-11 03:07:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-11 07:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter alex 2003-03-11 07:54:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-11 08:37:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Setup for stepping on revolution counter Nigel Bailey 2003-03-13 07:22:11 UTC re: using optical mouse for DRO / servo feedback Jon Elson 2003-03-13 09:57:15 UTC Re: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback Nigel Bailey 2003-03-14 01:52:06 UTC RE: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback Jon Elson 2003-03-14 09:31:10 UTC Re: [CAD_CAM_EDM_DRO] re: using optical mouse for DRO / servo feedback