Re: DRO on computer?

Just finished building the circuit using a PIC described in
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Caliper_info/Impor
ted_Caliper_Info/Caliper_stuff.zip and programmed a 16F84 with
the .hex file but it doesn´t work correctly. When i hook it up to a
PC it just send a garbage sign about every second. I´m not used to
working with PICs so I could need some help. Maybe Wilfred or Lee
Studley? Or somebody else who have (succesfully) buildt the device?

/Halle

--- In CAD_CAM_EDM_DRO@yahoogroups.com, <halle@t...> wrote:
> I'm working on an project using low-cost linear-scales, some
interface-electronics and a PC as a DRO. The scales are (chinese
made?) no-name capacitive type and has a resolution of 0.01mm. Maybe
not as cheap as using a PC-mouse but a little bit better a think (for
me anyway). Are there anyone interested out there?
>
> /Halle
>
> ----- Original Message -----
> From: "jerrybenham" <jbenham@m...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, March 11, 2003 9:34 PM
> Subject: [CAD_CAM_EDM_DRO] DRO on computer?
>
>
> > Unless I am mistaken (and I could very well be) I read something
about
> > using a PC, some scales mounted to the ways of a machine and a
serial
> > cable to connect them to the computer. The computer uses a
software
> > package that works directly with the scales to operate just like a
> > dedicated DRO.
> >
> > Am I dreaming here or does such a setup exist? Where does one
find
> > the hardware and/or the software?
> >
> > Any leads will be greatly appreciated.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >