Re: Mill recommendation
Posted by
kdoney_63021
on 2003-05-11 12:20:26 UTC
The new Sherline complete CNC system is the way to go if you don't
want to build the same system yourself for much less. Being able to
buy individual components, after research, put them together and have
them work is one of the advantages of choosing systems this small. If
I were making a recommendation, I would say to take the money you
have and purchase the best individual components available.
By the way, if you take your time, you can cut anything on a Sherline
you can cut on any other machine as long as it fits in the envelope.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Don McLane <dmclane@i...>
wrote:
want to build the same system yourself for much less. Being able to
buy individual components, after research, put them together and have
them work is one of the advantages of choosing systems this small. If
I were making a recommendation, I would say to take the money you
have and purchase the best individual components available.
By the way, if you take your time, you can cut anything on a Sherline
you can cut on any other machine as long as it fits in the envelope.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Don McLane <dmclane@i...>
wrote:
> The school I teach at is thinking of buying a small millingmachine. I
> want to influence the decision toward one that can be upgraded toservo
> control with EMC. I'm a software person, and not familiar with the
> machines. I know that Sherline is popular. Any recommendations?
>
> Thanks,
> Don McLane
> University of Washington Tacoma
Discussion Thread
los_pachecos2002
2003-04-30 09:36:36 UTC
Rotary table for CNC mill
turbulatordude
2003-04-30 11:16:23 UTC
Re: Rotary table for CNC mill
Raymond Heckert
2003-04-30 20:25:05 UTC
Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill
americo pacheco
2003-05-01 15:18:07 UTC
Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill
Don McLane
2003-05-10 18:44:45 UTC
Mill recommendation
Jon Anderson
2003-05-10 19:23:45 UTC
Re: [CAD_CAM_EDM_DRO] Mill recommendation
Jon Elson
2003-05-10 22:16:25 UTC
Re: [CAD_CAM_EDM_DRO] Mill recommendation
dvideohd
2003-05-11 00:10:55 UTC
Re: Mill recommendation
Tim Goldstein
2003-05-11 10:29:15 UTC
RE: [CAD_CAM_EDM_DRO] Mill recommendation
kdoney_63021
2003-05-11 12:20:26 UTC
Re: Mill recommendation
David A. Frantz
2003-05-12 00:43:48 UTC
Re: [CAD_CAM_EDM_DRO] Mill recommendation