Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill

I will look into it. Thanks for the response.

Americo

>From: "Raymond Heckert" <jnr@...>
>Reply-To: CAD_CAM_EDM_DRO@yahoogroups.com
>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>Subject: Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill
>Date: Sat, 30 Apr 2005 22:09:26 -0700
>
>Increasing the circumference won't help. But, you should be able to "scale"
>the 4th axis (rotary table) to get the full 360 degrees from your rotary
>table., For example, if you're only getting 358 degrees in your circle,
>increase the scale factor of the 4th axis by 1.0055866xxx. Hope you have
>the capabilities to "scale" (it should be somewhere in your setup files),
>otherwise, I don't know how you'd handle the problem.
>
>RayHex
>
>----------
> > From: los_pachecos2002 <pacheco_americo@...>
>
> > I recently purchased a rotary table with the intention of
> > prototyping rings. I have made several unsuccessful attempts at
> > cutting a ring.
> >
> > The table will cut the ring the full 360 degrees. There is a slight
> > gap on the bottom portion. Is there anyone who can offer some
> > information in using the rotary table successfully?
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail