Re: [CAD_CAM_EDM_DRO] Mill recommendation

on 2003-05-10 19:23:45 UTC

Don,

Sherline has finally gone all the way and now offers a CNC package
turnkey except for the PC. They are using EMC and include 4 stepper
drivers so adding a 4th axis is simply a matter of connecting the 4th
axis motor to the driver. Total package is under $2k. Stepper motors
look on the small side for serious hobby/small production but are
probably just fine for educational use.

Jon

Discussion Thread

los_pachecos2002 2003-04-30 09:36:36 UTC Rotary table for CNC mill turbulatordude 2003-04-30 11:16:23 UTC Re: Rotary table for CNC mill Raymond Heckert 2003-04-30 20:25:05 UTC Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill americo pacheco 2003-05-01 15:18:07 UTC Re: [CAD_CAM_EDM_DRO] Rotary table for CNC mill Don McLane 2003-05-10 18:44:45 UTC Mill recommendation Jon Anderson 2003-05-10 19:23:45 UTC Re: [CAD_CAM_EDM_DRO] Mill recommendation Jon Elson 2003-05-10 22:16:25 UTC Re: [CAD_CAM_EDM_DRO] Mill recommendation dvideohd 2003-05-11 00:10:55 UTC Re: Mill recommendation Tim Goldstein 2003-05-11 10:29:15 UTC RE: [CAD_CAM_EDM_DRO] Mill recommendation kdoney_63021 2003-05-11 12:20:26 UTC Re: Mill recommendation David A. Frantz 2003-05-12 00:43:48 UTC Re: [CAD_CAM_EDM_DRO] Mill recommendation