Re: [CAD_CAM_EDM_DRO] Re: Need xyz driver board kit...How do I interface the geckos drivers...

Hector,

You may want to look at my web page at www.campbelldesigns.com for my
break-out board.

Bob Campbell

----- Original Message -----
From: "cncnovice" <crcitser@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, June 05, 2003 8:26 PM
Subject: [CAD_CAM_EDM_DRO] Re: Need xyz driver board kit...How do I
interface the geckos drivers...


> Hector,
> Contact Robert Campbell on this group. He sells a first-class
> breakout board that will make it easy to interface your PC to the
> Geckos and limit switches - very reasonable in cost, too.
>
> Good luck,
> John Champlain
>
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Hector"
> <hector_a_quintanilla@y...> wrote:
> > I need to know which gecko driver can drive te sanyo-DEnki H
> Series,
> > teh model I mentioned earlier. And I'm not an expert, I just
> > starting so If I understand correct the geckos are single axis
> > controllers, so I will need three, one for each axis x,y,and z. So
> > with what kind of interface do I send signals to each separate
> > driver? I want to send signals through the parallel port on my
> > computer, from there to a interface that controls each axis.
> > Regards..
> > HEctor Quintanilla
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>