Re: [CAD_CAM_EDM_DRO] Re: Need xyz driver board kit...How do I interface the geckos drivers...

Hector,

If you use my break-out board for Mach1, you will be able to turn things
like you router on/off through a solid state switch. This would require an M
code in your G code program.

You may want to download my Mach1 PDF file from my web page
www.campbelldesigns.com .

My break-out board will handle limit switches, either micro switches or
proximity sensors.

Bob Campbell

----- Original Message -----
From: "Hector" <hector_a_quintanilla@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, June 06, 2003 6:01 PM
Subject: [CAD_CAM_EDM_DRO] Re: Need xyz driver board kit...How do I
interface the geckos drivers...


> Hi Bob,
> Will the Mach1 control when the router turns on and of If I use a
> appropiate software? and does it handle limit switches...I almost
> sure it can, so I fill a little dumb asking...
> Regards...
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell" <bob@c...>
> wrote:
> > Hector,
> >
> > You may want to look at my web page at www.campbelldesigns.com for
> my
> > break-out board.
> >
> > Bob Campbell
> > ----- Original Message -----
> > From: "cncnovice" <crcitser@g...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Thursday, June 05, 2003 8:26 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Need xyz driver board kit...How do I
> > interface the geckos drivers...
> >
> >
> > > Hector,
> > > Contact Robert Campbell on this group. He sells a first-class
> > > breakout board that will make it easy to interface your PC to the
> > > Geckos and limit switches - very reasonable in cost, too.
> > >
> > > Good luck,
> > > John Champlain
> > >
> > >
> > >
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Hector"
> > > <hector_a_quintanilla@y...> wrote:
> > > > I need to know which gecko driver can drive te sanyo-DEnki H
> > > Series,
> > > > teh model I mentioned earlier. And I'm not an expert, I just
> > > > starting so If I understand correct the geckos are single axis
> > > > controllers, so I will need three, one for each axis x,y,and
> z. So
> > > > with what kind of interface do I send signals to each separate
> > > > driver? I want to send signals through the parallel port on my
> > > > computer, from there to a interface that controls each axis.
> > > > Regards..
> > > > HEctor Quintanilla
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > timg@k...
> > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>