Re: [CAD_CAM_EDM_DRO] Subject: Re: oscilloscope for CNC
Posted by
David A. Frantz
on 2003-06-29 16:43:35 UTC
Hi tanya;
No time like the present to get professional :)
On the other hand, scopes, even used ones, are expensive. Unless you
have someone locally to introduce you to a scope it would be best to
audit a few electronics classes before considering such a purchase.
Thanks
Dave
tanyasapa wrote:
No time like the present to get professional :)
On the other hand, scopes, even used ones, are expensive. Unless you
have someone locally to introduce you to a scope it would be best to
audit a few electronics classes before considering such a purchase.
Thanks
Dave
tanyasapa wrote:
>Thanks to all who provided so much info and tips on and off list.
>Did'nt expect to get so much material to digest.
>
>For now, I think I'll just use the PC-based oscilloscope, and put off
>getting a professional oscilloscope till I get more professional.
>
>Thanks again.
>
>Tanya
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Stephan Kotzé <stephank@c...>
>wrote:
>
>
>>Tanya
>>
>>If it is analogue signals, you need a bandwidth of about 5 times
>>
>>
>your max frequency you want to measure. Digital signals you need
>about 2 times unless you want to do glitch capture. Something that
>can do a waveform capture is always good. Personally I prefer
>HP/Agilent, but I have a Tektronix scope DSP360 ($4000) . The FLUKE
>Scopemeter series is not to bad if you want portable and rugged. Stay
>away from anything less than 50 Mhz. Look on Ebay, there is normally
>a lot of units available.
>
>
>>Stephan
>>
>>
>>---
>>Outgoing mail is certified Virus Free.
>>Checked by AVG anti-virus system (http://www.grisoft.com).
>>Version: 6.0.490 / Virus Database: 289 - Release Date: 18/06/2003
>>
>>[Non-text portions of this message have been removed]
>>
>>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
Discussion Thread
Stephan Kotzé
2003-06-29 01:25:50 UTC
Subject: Re: oscilloscope for CNC
Bernard R
2003-06-29 08:10:21 UTC
Subject: Re: oscilloscope for CNC
tanyasapa
2003-06-29 11:16:58 UTC
Subject: Re: oscilloscope for CNC
Lee Studley
2003-06-29 12:18:26 UTC
bitscope Was: oscilloscope for CNC
David A. Frantz
2003-06-29 16:43:35 UTC
Re: [CAD_CAM_EDM_DRO] Subject: Re: oscilloscope for CNC
turbulatordude
2003-06-29 18:15:07 UTC
Subject: Re: oscilloscope for CNC
turbulatordude
2003-06-29 18:15:19 UTC
Subject: Re: oscilloscope for CNC
turbulatordude
2003-06-29 18:15:39 UTC
Subject: Re: oscilloscope for CNC
Vince Negrete
2003-06-29 18:48:16 UTC
Re: oscilloscope for CNC
Charles Hixon
2003-06-29 18:54:25 UTC
Subject: Re: oscilloscope for CNC
Vince Negrete
2003-06-29 19:07:11 UTC
Re: [CAD_CAM_EDM_DRO] Subject: Re: oscilloscope for CNC
Harvey White
2003-06-29 19:19:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
Harvey White
2003-06-29 19:22:24 UTC
Re: [CAD_CAM_EDM_DRO] Subject: Re: oscilloscope for CNC
Charles Hixon
2003-06-29 19:39:25 UTC
Subject: Re: oscilloscope for CNC
turbulatordude
2003-06-30 03:31:46 UTC
monitoring operation temperature ( was oscilloscope for CNC -
Charles Hixon
2003-06-30 06:11:36 UTC
Re: monitoring operation temperature ( was oscilloscope for CNC -
John Swenson
2003-06-30 14:04:31 UTC
Re: oscilloscope for CNC
Harvey White
2003-06-30 14:14:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
Vic Shuttlewood
2003-06-30 15:41:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: monitoring operation temperature ( was oscilloscope for CNC -