Re: 5C collet closer drawbar threading problem
Posted by
doug98105
on 2003-07-08 14:20:51 UTC
Kim,
Just curious.... why are you using the collet's internal threads for
the drawbar? 5C collets are made to use the external thread for
closers. Not all 5C collets have the internal thread.
Doug
Just curious.... why are you using the collet's internal threads for
the drawbar? 5C collets are made to use the external thread for
closers. Not all 5C collets have the internal thread.
Doug
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Kim Lux <lux@d...> wrote:
> We just solved this problem.
>
> We cut the thread deeper and cleaned up the internal collet
threads.
> The collet can now be made to run true on the threads.
>
> Kim
>
>
>
> On Tue, 2003-07-08 at 12:39, Kim Lux wrote:
> > We are building an air operated 5C collet closer.
> >
> > The drawbar we are making is machined from a piece of seamless
> > mechanical tubing. We've got it adjusted for zero runout.
> >
> > We are cutting a 1.044" OD x 24 TPI thread on the outside of a
1.250"
> > piece of tubing turned down to 1.030" This will pull on the
internal
> > thread of the collet to close it in the chuck.
> >
> > We've threaded two of these drawbars now and both times the
collet has
> > significant runout when threaded to the drawbar. Why ? The
thread
> > seems to be high quality. The collet seems to be OK. The
drawbar runs
> > true. Why does the collet have runout when screwed on ?
> >
> > What is the solution to this problem ?
> >
> > I'm tempted to cut the thread loose so that the collet can
center itself
> > in the chuck irrespective of the drawbar position.
> >
> > Any help would be appreciated. Thanks.
> >
> >
> >
> > Kim Lux <lux@d...>
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> --
> Kim Lux <lux@d...>
Discussion Thread
Bill Kichman
2003-07-07 18:58:24 UTC
Parallel Port to Power Supply Grounding Differential
int3man
2003-07-07 21:48:51 UTC
Re: Parallel Port to Power Supply Grounding Differential
Jon Elson
2003-07-07 22:07:32 UTC
Re: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
Tim Goldstein
2003-07-07 23:08:19 UTC
RE: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
Bill Kichman
2003-07-08 05:47:27 UTC
Re: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
turbulatordude
2003-07-08 07:16:07 UTC
Re: Parallel Port to Power Supply Grounding Differential
Jon Elson
2003-07-08 09:28:38 UTC
Re: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
JanRwl@A...
2003-07-08 09:52:52 UTC
Re: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
Rob WHITE
2003-07-08 09:59:44 UTC
has anyone added a CNC system to this mill
Don Rogers
2003-07-08 10:08:48 UTC
Re: Parallel Port to Power Supply Grounding Differential
JanRwl@A...
2003-07-08 10:15:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Parallel Port to Power Supply Grounding Differential
Bill Kichman
2003-07-08 10:39:06 UTC
Re: [CAD_CAM_EDM_DRO] Parallel Port to Power Supply Grounding Differential
washcomp
2003-07-08 10:43:33 UTC
Re: Parallel Port to Power Supply Grounding Differential
Kim Lux
2003-07-08 11:12:47 UTC
Gecko 320 heatsink requirements: needed ?
Kim Lux
2003-07-08 11:29:18 UTC
5C collet closer drawbar threading problem
Kim Lux
2003-07-08 11:48:44 UTC
Re: [CAD_CAM_EDM_DRO] 5C collet closer drawbar threading problem
Weyland
2003-07-08 13:55:57 UTC
Re: [CAD_CAM_EDM_DRO] 5C collet closer drawbar threading problem
doug98105
2003-07-08 14:20:51 UTC
Re: 5C collet closer drawbar threading problem
Kim Lux
2003-07-08 14:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5C collet closer drawbar threading problem
Vince Negrete
2003-07-08 16:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Parallel Port to Power Supply Grounding Differential
Jon Elson
2003-07-08 21:48:03 UTC
Re: [CAD_CAM_EDM_DRO] Gecko 320 heatsink requirements: needed ?
Jon Elson
2003-07-08 21:53:56 UTC
Re: [CAD_CAM_EDM_DRO] 5C collet closer drawbar threading problem
Kim Lux
2003-07-08 22:59:09 UTC
Re: [CAD_CAM_EDM_DRO] 5C collet closer drawbar threading problem