Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Posted by
David M. Munro
on 2000-03-18 15:58:41 UTC
When you are centering parts, you pick up one point, zero it, and go to a
second point, enter the distance data, divide by two, and enter. (Or go
back half way and re-zero) This is one of the most common things you do
with a DRO. A one touch "1/2" button would be a real plus. I'm surprised
no one has thought of it before.
David M. Munro
second point, enter the distance data, divide by two, and enter. (Or go
back half way and re-zero) This is one of the most common things you do
with a DRO. A one touch "1/2" button would be a real plus. I'm surprised
no one has thought of it before.
David M. Munro
>From: "Glen Benson" <benson@...>
> I was thinking of using a seperate color of LED diplay for each
>axis. Besides a button to zero each axis are there any other features
>I need to consider?
Discussion Thread
Glen Benson
2000-03-18 14:14:58 UTC
PIC DRO Revisited
stratton@m...
2000-03-18 14:40:27 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Ken Lowther
2000-03-18 14:46:49 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 14:59:33 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-18 15:07:56 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
David M. Munro
2000-03-18 15:58:41 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Eric Keller
2000-03-18 16:12:34 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 16:42:06 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Paul Devey
2000-03-18 20:34:13 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Jon Elson
2000-03-18 23:19:44 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Bill Phillips
2000-03-19 13:44:02 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-19 14:34:58 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Tim Goldstein
2000-03-19 15:02:48 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 05:01:26 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-20 05:47:47 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 06:06:39 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
SMITH, THOMAS B. (JSC-DX)
2000-03-21 09:06:00 UTC
RE: PIC DRO Revisited