RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Posted by
Paul Devey
on 2000-03-18 20:34:13 UTC
Glen,
If I might suggest, keep your initial function set minimal and initial
design open for expansion. This will allow you to get it up and running
fairly quickly. At that point the debugging begins.
As for a display, I am rather partial to what I think are called Vacuum
Fluorescent. They are a dot matrix display used in cash registers and some
car audio systems. Their displays are clearly visible in the brightly light
stores and insides of cars.
Cheers!
Paul Devey
-----Original Message-----
From: Glen Benson [SMTP:benson@...]
Sent: Saturday, March 18, 2000 5:14 PM
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] PIC DRO Revisited
From: "Glen Benson" <benson@...>
Hi,
I have been programming PICs for a few years, and am cosidering
making a 3 axis DRO. I would be more than glad to share my
design,code,schematics with all. Having never worked with a DRO, I
have a couple of questions. How does the DRO know which direction the
motor is going (so it can increment or decrement). Also what
properties do the average encoders have (e.g. opto
using a 5 volt supply, hall effect) do they pulse a signal out or
need a supply voltage etc.
I was thinking of using a seperate color of LED diplay for each
axis. Besides a button to zero each axis are there any other features
I need to consider?
Thanks
Glen Benson
------------------------------------------------------------------------
PERFORM CPR ON YOUR APR!
Get a NextCard Visa, in 30 seconds! Get rates as low as
0.0% Intro or 9.9% Fixed APR and no hidden fees.
Apply NOW!
http://click.egroups.com/1/2121/2/_/423600/_/953417625/
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
If I might suggest, keep your initial function set minimal and initial
design open for expansion. This will allow you to get it up and running
fairly quickly. At that point the debugging begins.
As for a display, I am rather partial to what I think are called Vacuum
Fluorescent. They are a dot matrix display used in cash registers and some
car audio systems. Their displays are clearly visible in the brightly light
stores and insides of cars.
Cheers!
Paul Devey
-----Original Message-----
From: Glen Benson [SMTP:benson@...]
Sent: Saturday, March 18, 2000 5:14 PM
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] PIC DRO Revisited
From: "Glen Benson" <benson@...>
Hi,
I have been programming PICs for a few years, and am cosidering
making a 3 axis DRO. I would be more than glad to share my
design,code,schematics with all. Having never worked with a DRO, I
have a couple of questions. How does the DRO know which direction the
motor is going (so it can increment or decrement). Also what
properties do the average encoders have (e.g. opto
using a 5 volt supply, hall effect) do they pulse a signal out or
need a supply voltage etc.
I was thinking of using a seperate color of LED diplay for each
axis. Besides a button to zero each axis are there any other features
I need to consider?
Thanks
Glen Benson
------------------------------------------------------------------------
PERFORM CPR ON YOUR APR!
Get a NextCard Visa, in 30 seconds! Get rates as low as
0.0% Intro or 9.9% Fixed APR and no hidden fees.
Apply NOW!
http://click.egroups.com/1/2121/2/_/423600/_/953417625/
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
Discussion Thread
Glen Benson
2000-03-18 14:14:58 UTC
PIC DRO Revisited
stratton@m...
2000-03-18 14:40:27 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Ken Lowther
2000-03-18 14:46:49 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 14:59:33 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-18 15:07:56 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
David M. Munro
2000-03-18 15:58:41 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Eric Keller
2000-03-18 16:12:34 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 16:42:06 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Paul Devey
2000-03-18 20:34:13 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Jon Elson
2000-03-18 23:19:44 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Bill Phillips
2000-03-19 13:44:02 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-19 14:34:58 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Tim Goldstein
2000-03-19 15:02:48 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 05:01:26 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-20 05:47:47 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 06:06:39 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
SMITH, THOMAS B. (JSC-DX)
2000-03-21 09:06:00 UTC
RE: PIC DRO Revisited