CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited

Posted by ptengin@a...
on 2000-03-18 16:42:06 UTC
In a message dated 3/18/00 1:58:24 PM Hawaiian Standard Time,
munro@... writes:

<< When you are centering parts, you pick up one point, zero it, and go to a
second point, enter the distance data, divide by two, and enter. (Or go
back half way and re-zero) This is one of the most common things you do
with a DRO. A one touch "1/2" button would be a real plus. I'm surprised
no one has thought of it before.

David M. Munro >>

David,
My Mitutoyo KC DRO has the "1/2" button. I use it the most. The next most
often used is the numeric keypad. There is the bolt hole pattern button.
Real handy.

Peter
THRD, Inc.

Discussion Thread

Glen Benson 2000-03-18 14:14:58 UTC PIC DRO Revisited stratton@m... 2000-03-18 14:40:27 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Ken Lowther 2000-03-18 14:46:49 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited ptengin@a... 2000-03-18 14:59:33 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited james owens 2000-03-18 15:07:56 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited David M. Munro 2000-03-18 15:58:41 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Eric Keller 2000-03-18 16:12:34 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited ptengin@a... 2000-03-18 16:42:06 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Paul Devey 2000-03-18 20:34:13 UTC RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited Jon Elson 2000-03-18 23:19:44 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Bill Phillips 2000-03-19 13:44:02 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited james owens 2000-03-19 14:34:58 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Tim Goldstein 2000-03-19 15:02:48 UTC RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited Marshall Pharoah 2000-03-20 05:01:26 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited james owens 2000-03-20 05:47:47 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited Marshall Pharoah 2000-03-20 06:06:39 UTC Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited SMITH, THOMAS B. (JSC-DX) 2000-03-21 09:06:00 UTC RE: PIC DRO Revisited