Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Posted by
Eric Keller
on 2000-03-18 16:12:34 UTC
The mind boggles at the conveniences one could build into a DRO.
With a pic the user interface becomes a problem. I wish i could use
the edge finder and have the dro correct for that too. I could go on and
on.
eric
With a pic the user interface becomes a problem. I wish i could use
the edge finder and have the dro correct for that too. I could go on and
on.
eric
----- Original Message -----
From: David M. Munro
To: CAD_CAM_EDM_DRO@onelist.com
Sent: Saturday, March 18, 2000 3:47 PM
Subject: Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
From: "David M. Munro" <munro@...>
When you are centering parts, you pick up one point, zero it, and go to a
second point, enter the distance data, divide by two, and enter. (Or go
back half way and re-zero) This is one of the most common things you do
with a DRO. A one touch "1/2" button would be a real plus. I'm surprised
no one has thought of it before.
Discussion Thread
Glen Benson
2000-03-18 14:14:58 UTC
PIC DRO Revisited
stratton@m...
2000-03-18 14:40:27 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Ken Lowther
2000-03-18 14:46:49 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 14:59:33 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-18 15:07:56 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
David M. Munro
2000-03-18 15:58:41 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Eric Keller
2000-03-18 16:12:34 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
ptengin@a...
2000-03-18 16:42:06 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Paul Devey
2000-03-18 20:34:13 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Jon Elson
2000-03-18 23:19:44 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Bill Phillips
2000-03-19 13:44:02 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-19 14:34:58 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Tim Goldstein
2000-03-19 15:02:48 UTC
RE: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 05:01:26 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
james owens
2000-03-20 05:47:47 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
Marshall Pharoah
2000-03-20 06:06:39 UTC
Re: [CAD_CAM_EDM_DRO] PIC DRO Revisited
SMITH, THOMAS B. (JSC-DX)
2000-03-21 09:06:00 UTC
RE: PIC DRO Revisited