Re: [CAD_CAM_EDM_DRO] Question for Mariss

On Monday 15 September 2003 01:14 am, Jon Elson spake:

> Weyland wrote:
> >Mariss,
> >
> >During a web search on the motors I have and am
> >trying to use, I found some posts from a date later
> >than when I bought my motors, right here in this group.
> >
> >Here's the question -
> >How do I know what revision my Gecko G210s are?
> >Mine are marked with a "90IFX" on the covers.
> >
> >The reason I ask is that I just found
> >out that mine may not work for my motors.
> >
> >The post and motors described are found here -
> >
> >http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/message/40840?source=1
>
> Note that that message from Mariss was in February 2002! I'm pretty
> sure that jumper option is in any drives made this year.

Yes, but a post from me that led to the purchase of my Geckos
shortly after is found here, and shows a date of September 6, 2001.

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/message/30154?source=1

Hence my concern that my Geckos may not work with my steppers...

Best,

Weyland