CAD CAM EDM DRO - Yahoo Group Archive

Re: Question for Mariss

on 2003-09-15 08:35:52 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Weyland <weyland@v...> wrote:
> On Monday 15 September 2003 01:14 am, Jon Elson spake:
>
> > Weyland wrote:
> > >Mariss,
> > >
> > >During a web search on the motors I have and am
> > >trying to use, I found some posts from a date later
> > >than when I bought my motors, right here in this group.
> > >
> > >Here's the question -
> > >How do I know what revision my Gecko G210s are?
> > >Mine are marked with a "90IFX" on the covers.
> > >
> > >The reason I ask is that I just found
> > >out that mine may not work for my motors.
> > >
> > >The post and motors described are found here -
> > >
> > >http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/message/40840?
source=1
> >
> > Note that that message from Mariss was in February 2002! I'm
pretty
> > sure that jumper option is in any drives made this year.
>
> Yes, but a post from me that led to the purchase of my Geckos
> shortly after is found here, and shows a date of September 6, 2001.
>
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/message/30154?source=1
>
> Hence my concern that my Geckos may not work with my steppers...
>
> Best,
>
> Weyland




I am not familiar with any stepper motor drivers, 201 of 210 that
cannot run any 4,6 or 8 wire steppers that fall within the voltage
and current ranges.

I've been wrong before, but the chopper output does not care what
color or shape the motor has, as long as the volts/amps/induction is
withing range.

Dave

Discussion Thread

rsgoldner 2002-02-13 06:36:39 UTC Question for Mariss a_w_abate 2002-02-13 09:20:25 UTC Re: Question for Mariss rsgoldner 2002-02-13 09:51:57 UTC Re: Question for Mariss dave_ace_me 2002-02-13 10:06:29 UTC Re: Question for Mariss mariss92705 2002-02-13 10:36:35 UTC Re: Question for Mariss rsgoldner 2002-02-13 10:58:07 UTC Re: Question for Mariss mariss92705 2002-02-13 12:12:16 UTC Re: Question for Mariss NCS 2002-02-13 12:44:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss rsgoldner 2002-02-13 13:52:17 UTC Re: Question for Mariss mariss92705 2002-02-13 15:00:10 UTC Re: Question for Mariss rsgoldner 2002-02-13 15:42:47 UTC Re: Question for Mariss dave_ace_me 2002-02-13 17:45:37 UTC Re: Question for Mariss rsgoldner 2002-05-18 09:04:09 UTC Question for Mariss mariss92705 2002-05-18 09:14:15 UTC Re: Question for Mariss Scott Hendershot 2002-05-18 21:27:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss JanRwl@A... 2002-05-18 22:47:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss Scott Hendershot 2002-05-19 08:38:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss rsgoldner 2002-05-19 09:23:11 UTC Re: Question for Mariss Weyland 2003-09-14 01:15:24 UTC Question for Mariss Jon Elson 2003-09-14 22:14:09 UTC Re: [CAD_CAM_EDM_DRO] Question for Mariss Mariss Freimanis 2003-09-14 22:52:23 UTC Re: Question for Mariss Weyland 2003-09-15 02:08:07 UTC Re: [CAD_CAM_EDM_DRO] Question for Mariss Weyland 2003-09-15 02:09:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss turbulatordude 2003-09-15 08:35:52 UTC Re: Question for Mariss Weyland 2003-09-15 10:26:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Question for Mariss