Re: [CAD_CAM_EDM_DRO] Re: Taig Mill Conversion: Motor and Power Supply Selection

114 oz-in may be OK for a Sherline, but I would not recommend anything less
than around 200 oz-in motors for the Taig. The Taig CNC mill is fitted with
200 oz-in motors as standard these days; while you might get away with less
on the X and Y axes (mine was originally fitted with 140 oz-in motors), the
Z definitely needs more than that.

Regards,
Tony

At 19:21 18/09/2003 +0000, Antonius J.M. Groothuizen wrote:

>You might want to take a look at US Digital's MS23's at $60 USD if
>you want to buy new. These are rated at 114 in-oz RUNNING torque,
>and were recommended by Mariss for a Sherline.
>
>Tony
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "khalique_rehman"
><khalique_rehman@y...> wrote:
> > Hi Everyone,
> > I am about to place an order for Taig CNC Ready Mill, 2019CR that I
> > will convert to CNC (been in contact with Nick of CarterTools). I
>am
> > inclined to buy Geckos 210. I intend to use Taig with whatever is
> > Taig capable of. Most importantly jewelry, among other things.
> > Given this information, how I choose the steppers and power supply.
> > What would be their specs and the sources to buy from?
> > Thanks.
> > kr.
> > No CNC experience but eager to learn (cost effectively).
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Regards,
Tony