CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. My contributions...

Posted by Kim Lux
on 2003-10-21 11:32:16 UTC
While I'm justifying my contributions, here are a few more things I did:

- I've posted several times in the past few weeks about how well Amatek
servo motors work with Geckos, etc.

- I faxed rough drawings to the gentleman we did the spindles for. BTW,
I didn't charge him. I believe my words to him were "others have helped
me, so I'll help you... pass it on... "

- I recommended a spindle encoder (Cherry model from Digikey) and
described and sent a picture of its <nice> installation to the TCNC
moderator/group.

- I've spoken on the phone with several people interested in CNCing a
lathe or milling machine, offering advice where possible.

- I've relayed my thoughts, opinions and questions to a small group of
"CNC interested" individuals. I'd post them to the CAD_CAM... group,
but I had the impression it would be interpreted as being over the top.

Did I mention that I am incredibly busy at work ? I have made a very
special effort to share and communicate as much as possible to the CNC
community.

--
Kim Lux <lux@...>

Discussion Thread

Thomas E. Jones 2003-10-18 21:38:05 UTC Ballscrews on an RF-45... JanRwl@A... 2003-10-18 22:48:59 UTC Re: [CAD_CAM_EDM_DRO] Ballscrews on an RF-45... jmorrphd2 2003-10-19 04:33:47 UTC Re: Ballscrews on an RF-45... John Johnson 2003-10-19 17:03:23 UTC Re: [CAD_CAM_EDM_DRO] Ballscrews on an RF-45... Kim Lux 2003-10-20 07:27:04 UTC RF45s and clones: DON'T. ccq@x... 2003-10-20 08:19:04 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Kim Lux 2003-10-20 08:23:43 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Jerry Kimberlin 2003-10-20 09:26:07 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Kim Lux 2003-10-20 09:38:45 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Thomas Powell 2003-10-20 13:04:11 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Kim Lux 2003-10-20 14:12:15 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Jerry Kimberlin 2003-10-20 14:25:42 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Kim Lux 2003-10-20 14:52:33 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. vavaroutsos 2003-10-20 16:39:13 UTC Re: RF45s and clones: DON'T. Marcus and Eva 2003-10-20 18:51:47 UTC Re: [CAD_CAM_EDM_DRO] Re: RF45s and clones: DON'T. jmorrphd2 2003-10-20 19:12:26 UTC Re: RF45s and clones: DON'T get a TM-1 Thomas Powell 2003-10-21 01:06:05 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Jon Elson 2003-10-21 10:52:45 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Kim Lux 2003-10-21 11:16:23 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. My contributions... Kim Lux 2003-10-21 11:32:16 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. My contributions... David A. Frantz 2003-10-21 12:03:30 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. Bill Kichman 2003-10-21 12:17:13 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. My contributions... Tim Goldstein 2003-10-21 14:24:57 UTC RE: [CAD_CAM_EDM_DRO] Off Topic : RF45s and clones: DON'T. My contributions... Jon Elson 2003-10-21 22:33:18 UTC Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T. My contributions... Kim Lux 2003-10-22 08:17:56 UTC CNC Threading question for Jon... Jon Elson 2003-10-22 10:31:51 UTC Re: [CAD_CAM_EDM_DRO] CNC Threading question for Jon... Kim Lux 2003-10-22 12:13:06 UTC Re: [CAD_CAM_EDM_DRO] CNC Threading question for Jon...