Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T.

Hi Jon;

I'm rather surprised at you response here. We all have our methods of
communicating, even with that consideration it takes a bit of time to
add value in a constructive manner. While I consider myself to be
very new to this group, I have seen Kim making considerable
contributions to a number of on line venues.

As to the issue of part numbers, it is one thing to provide someone a
part number out of a commonly available manual. Here you have a
reasonable chance of successfully conveying the information required.
It is much more difficult to supply information for a modification that
is not fully documented or indeed not documented at all.

It is one thing to supply someone with a name of a vendor of products,
it is another thing to try to specify parts for a conversion that is for
the purposes of this discusiion an enigma to you. There is s
difference between a reccomendation and a specification. A
reccomendation may or may not point a person in the right direction, by
specifying you are say something will work. It is very hard to
specify anything if you don't know the nature of the conversion.

Thanks
Dave


Jon Elson wrote:

>>----- Original Message -----
>>From: "Kim Lux" <lux@...>
>>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>>Sent: Monday, October 20, 2003 11:16 AM
>>Subject: Re: [CAD_CAM_EDM_DRO] RF45s and clones: DON'T.
>>
>>
>>
>>
>>
>>
>>>Nook, 5TPI, 5/8, 0.001/foot.
>>>
>>>Pics: yes, tons. I don't have time to post them and I don't have time
>>>to write up explanations/plans to go with it. CNC conversions are
>>>complicated. Someone really needs to write a book on the subject, but
>>>it won't be me.
>>>
>>>
>>>
>>>
>>>
>Ah, yes. How helpful! He's been here for months, asking questions galore,
>but when someone asks for a part number, he doesn't have time! Well, I'll
>remember this very well when he next asks a question!
>
>Jon
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>