Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration

Hi, sometimes you can remove the back cover, being careful to keep the rotor
in the housing, that will allow you another 1/2 inch to work with the wires.
solder and heatshrink.. If you are not adept to soldering, if your close to
NH i would say ship em up i will try to reconnect. maybe someone near does
electronic work(ham radio) probably do it for coffee!
cul brian f.

----- Original Message -----
From: "Statman Designs, LLC" <titanium@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 23, 2004 2:28 PM
Subject: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration


> I just received some X-Y slides that came with Compumotor steppers model
> S57-83-MO with the wires cutoff close to the motor. I have tested the
wires
> for continuity between pairs and it resulted in the following wire pairs
> each with 2.4 ohms of resistance.
>
> Black - Blue
> Green - Brown
> Orange - White
> Red - Yellow
>
> All other combinations of wires resulted in infinite resistance,
>
> I will be driving these with a Xylotex driver and was wondering how to
> connect the wires.
>
> Thank you,
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
> dan.statman@...
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>