RE: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration

Hi Daniel,

Have you tried going to www.compumotor.com and searching for documentation
on the motors? They have a lot of spec sheets and manual available for
download.


Best,

Ed Gilbert

Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539

> -----Original Message-----
> From: Statman Designs, LLC [mailto:titanium@...]
> Sent: Friday, January 23, 2004 2:28 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
>
> I just received some X-Y slides that came with Compumotor steppers model
> S57-83-MO with the wires cutoff close to the motor. I have tested the
> wires
> for continuity between pairs and it resulted in the following wire pairs
> each with 2.4 ohms of resistance.
>
> Black - Blue
> Green - Brown
> Orange - White
> Red - Yellow
>
> All other combinations of wires resulted in infinite resistance,
>
> I will be driving these with a Xylotex driver and was wondering how to
> connect the wires.
>
> Thank you,
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
> dan.statman@...
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
> -------------------------------------
> This message has been scanned for viruses and
> dangerous content by NCOL.NET, and is believed to be clean.