Help with 8-wire stepper configuration
Posted by
Statman Designs, LLC
on 2004-01-23 11:30:49 UTC
I just received some X-Y slides that came with Compumotor steppers model
S57-83-MO with the wires cutoff close to the motor. I have tested the wires
for continuity between pairs and it resulted in the following wire pairs
each with 2.4 ohms of resistance.
Black - Blue
Green - Brown
Orange - White
Red - Yellow
All other combinations of wires resulted in infinite resistance,
I will be driving these with a Xylotex driver and was wondering how to
connect the wires.
Thank you,
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
S57-83-MO with the wires cutoff close to the motor. I have tested the wires
for continuity between pairs and it resulted in the following wire pairs
each with 2.4 ohms of resistance.
Black - Blue
Green - Brown
Orange - White
Red - Yellow
All other combinations of wires resulted in infinite resistance,
I will be driving these with a Xylotex driver and was wondering how to
connect the wires.
Thank you,
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
Discussion Thread
Statman Designs, LLC
2004-01-23 11:30:49 UTC
Help with 8-wire stepper configuration
Brian
2004-01-23 11:46:25 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Statman Designs, LLC
2004-01-23 12:01:33 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Alan Marconett KM6VV
2004-01-23 12:14:34 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Statman Designs, LLC
2004-01-23 13:04:53 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Amaury Jacquot
2004-01-23 13:26:54 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
rockinwood_2000
2004-01-23 13:27:28 UTC
Re: Help with 8-wire stepper configuration
Ed Gilbert
2004-01-23 13:27:58 UTC
RE: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Alan Marconett KM6VV
2004-01-23 15:38:35 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Ed Gilbert
2004-01-23 16:55:00 UTC
RE: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
Statman Designs, LLC
2004-01-23 18:46:14 UTC
Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration