Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration

Hi Brian,

i have enough wire sticking out of the motor, I just don't know how to hook
it up to the Xylotex drive.

Thanks,

Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...

----- Original Message -----
From: "Brian" <ka1bbg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 23, 2004 3:01 PM
Subject: Re: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration


> Hi, sometimes you can remove the back cover, being careful to keep the
rotor
> in the housing, that will allow you another 1/2 inch to work with the
wires.
> solder and heatshrink.. If you are not adept to soldering, if your close
to
> NH i would say ship em up i will try to reconnect. maybe someone near does
> electronic work(ham radio) probably do it for coffee!
> cul brian f.
> ----- Original Message -----
> From: "Statman Designs, LLC" <titanium@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, January 23, 2004 2:28 PM
> Subject: [CAD_CAM_EDM_DRO] Help with 8-wire stepper configuration
>
>
> > I just received some X-Y slides that came with Compumotor steppers model
> > S57-83-MO with the wires cutoff close to the motor. I have tested the
> wires
> > for continuity between pairs and it resulted in the following wire pairs
> > each with 2.4 ohms of resistance.
> >
> > Black - Blue
> > Green - Brown
> > Orange - White
> > Red - Yellow
> >
> > All other combinations of wires resulted in infinite resistance,
> >
> > I will be driving these with a Xylotex driver and was wondering how to
> > connect the wires.
> >
> > Thank you,
> >
> > Daniel J. Statman, Statman Designs
> > www.statmandesigns.com
> > dan.statman@...
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> >
> > To unsubscribe from this group, send an email to:
> > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>