Re: 28v power transformer

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@v...>
wrote:

> Hook up the cap and them measure it.
>
> Andy Wander
> Verrex Corporation
>
>
> -----Original Message-----
> From: stcnc2000 [mailto:thinkcnc@h...]
> Sent: Wednesday, April 21, 2004 5:46 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: 28v power transformer
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@v...>
> wrote:
> > and only get about 17vdc at
> > > > rectifer. The transformer i'm using is (MPJA) LP-437 18vct(9-

0-

> 9)
> > > > 2amps.
> > > > > >
> > > > I'm using a full-wave bridge.
> > > > It is 4 diodes and 4 terminals.
> > No load, 20 vac into the bridge, No Filter Cap connected yet have

a

> 15,000 uf 50v, Yes the bridge is hook up correct AC to Ac and then

i

> measure across + and - terminals.
> Thanks alot

I will give it a shot and let you know later.

> > Is this measurement with any kind of a load on the supply?
> > Have you measured the AC voltage going into the rectifier?
> > What kind of filter capacitor are you using?
> > And are you sure the rectifier is hooked up correctly?
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to

be a

> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links