Re: [CAD_CAM_EDM_DRO] What is the best way to CAD a flywheel w/spokes?

Hi Ken,

what do you need the gcode or the dxf file?.

Nick

----- Original Message -----
From: "mszollar" <kenargo@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, June 16, 2004 3:20 AM
Subject: [CAD_CAM_EDM_DRO] What is the best way to CAD a flywheel w/spokes?


> I am working on drawing a flywheel with 5 spokes, each 72 degrees
> apart. The outer rim of the cutout is offset 65 deg. from each
> spoke. I'm not quite certain where to start and how to go about it.
> Any help would be appreciated. Hopefully this makes sense but if an
> image is needed I can
> upload one.
>
> Thanks,
> Ken
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>