CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess...

Posted by erie
on 2004-08-28 11:23:45 UTC
ok, start from the beginning, are you saying you have resistors in
series with the motors??


If so, Geckos are "Chopper" type drives, they limit current and any
additional resistance
will give you exactly the symptoms you describe. Download the white
paper from the
gecko site, print it out and READ IT!!!! Use the appropriate current
setting resistors on the drive and
then let us know how you make out.
erie


Keith Clark wrote:

>Harvey, the motors are functioning now but still limited in terms of
>maximum speed to 20 ipm. They are bipolar in series as recommended
>by the motor factory with resistors to limit the power to 4.9 amps
>per the specs. I don't think the wiring is the problem plus these
>are high inductance motors. I would like to try to rewire but after
>cooking two Gecko drivers, I am quite reluctant except as a last
>resort.
>
>Thanks
>Keith
>
>
>

Discussion Thread

Keith Clark 2004-08-27 23:42:20 UTC new stepper motors wiring mess... Keith Clark 2004-08-28 06:57:52 UTC Re: new stepper motors wiring mess ?fixed! james_cullins@s... 2004-08-28 07:27:19 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Harvey White 2004-08-28 07:39:20 UTC Re: [CAD_CAM_EDM_DRO] new stepper motors wiring mess... Keith Clark 2004-08-28 07:40:16 UTC Re: new stepper motors wiring mess ?fixed! Harvey White 2004-08-28 07:40:47 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! R Rogers 2004-08-28 07:53:49 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! R Rogers 2004-08-28 07:54:27 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Keith Clark 2004-08-28 11:09:53 UTC Re: new stepper motors wiring mess ?fixed! Keith Clark 2004-08-28 11:14:42 UTC Re: new stepper motors wiring mess... erie 2004-08-28 11:23:45 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... Jon Elson 2004-08-28 11:26:17 UTC Re: [CAD_CAM_EDM_DRO] new stepper motors wiring mess... erie 2004-08-28 11:26:50 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... Keith Clark 2004-08-28 11:32:49 UTC Re: new stepper motors wiring mess... Andy Wander 2004-08-28 11:47:45 UTC RE: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Stephen Wille Padnos 2004-08-28 11:54:30 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Andy Wander 2004-08-28 11:55:02 UTC RE: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... Stephen Wille Padnos 2004-08-28 12:02:30 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... erie 2004-08-28 12:22:49 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Harvey White 2004-08-28 13:00:02 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... Keith Clark 2004-08-28 13:08:08 UTC Re: new stepper motors wiring mess ?fixed! Keith Clark 2004-08-28 13:10:10 UTC Re: new stepper motors wiring mess ?fixed! Keith Clark 2004-08-28 13:12:42 UTC Re: new stepper motors wiring mess... Andy Wander 2004-08-28 13:14:32 UTC RE: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Andy Wander 2004-08-28 13:15:41 UTC RE: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess... Keith Clark 2004-08-28 13:27:48 UTC Re: new stepper motors wiring mess ?fixed! erie 2004-08-28 13:31:07 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! Stephen Wille Padnos 2004-08-28 13:46:21 UTC Re: [CAD_CAM_EDM_DRO] Re: new stepper motors wiring mess ?fixed! metlmunchr 2004-08-29 10:05:10 UTC Re: new stepper motors wiring mess ?fixed! Keith Clark 2004-08-29 10:21:40 UTC Re: new stepper motors wiring mess ?fixed!