Re: [CAD_CAM_EDM_DRO] emc g92
Posted by
Jon Elson
on 2004-10-16 23:30:51 UTC
ednass01 wrote:
axis display, and you get a dialog box. If you just hit return, the axis
is set to zero. If you enter a value, that is what the axis reading at the
current position is set to.
Jon
>The most straightforward way is to right click with the mouse over the
>i have the emc rc46 bdi on a small lathe. i jog the machine into
>position and make the first cut. i then measure the part and set the
>machine position with g92. this does not seem to work for me. i have
>searched the web and found a lot of references to g92 and g54-g59.
>maybe g92 does not work on my machine or maybe i am confused. how can
>i reset the position in emc to match the position of the tool bit?
>
>
axis display, and you get a dialog box. If you just hit return, the axis
is set to zero. If you enter a value, that is what the axis reading at the
current position is set to.
Jon
Discussion Thread
ednass01
2004-10-16 22:03:08 UTC
emc g92
Jon Elson
2004-10-16 23:30:51 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
ednass01
2004-10-17 04:34:14 UTC
Re: emc g92
Tom Hubin
2004-10-17 16:04:50 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-17 17:46:36 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-17 17:54:22 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
R Rogers
2004-10-17 18:28:04 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Tom Hubin
2004-10-17 21:56:56 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-17 23:04:47 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Alan Marconett
2004-10-18 10:14:14 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Geert De Pecker
2004-10-18 11:39:27 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-18 18:44:19 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Alan Marconett
2004-10-18 19:06:01 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Tom Hubin
2004-10-18 21:04:42 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Tom Hubin
2004-10-18 21:04:45 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
ballendo
2004-10-18 21:36:42 UTC
Re: emc g92
Jon Elson
2004-10-18 23:26:22 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Geert De Pecker
2004-10-19 13:52:54 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Alan Marconett
2004-10-19 14:18:12 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Alan Marconett
2004-10-19 14:26:56 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-19 18:04:23 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
John Dammeyer
2004-10-19 21:05:55 UTC
RE: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-19 22:43:34 UTC
Re: [CAD_CAM_EDM_DRO] emc g92
John Dammeyer
2004-10-20 09:55:52 UTC
RE: [CAD_CAM_EDM_DRO] emc g92
Jon Elson
2004-10-20 19:31:22 UTC
Re: [CAD_CAM_EDM_DRO] emc g92