CAD CAM EDM DRO - Yahoo Group Archive

Re: HP plotter servo

on 2004-10-22 16:16:46 UTC
What model I worked at HP San Diego 1980 to 1990 we made plotters
I worked on the 7470 line they used pittman motors.
small but would probley drive a sherline size machine and the
elestronics can be used as is if you only nead 2 axis + up & down on
Z.

Don

-- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
>
> Hi all,
>
> I pulled apart an old HP plotter and found a pressed can stepper
and
> two servo motors. These are pretty small, about 1 inch by and inch
> and an half. 16 volts.
>
> Since they have encoders on the back they seem neat, but I have not
> clue if I can use them.
>
> Has anyone ever tried to use the plotter motors ?
>
> Has anyone ever hacked the controller board for these for CNC use ?
>
> Any ideas what to do with them ?
>
> Since I have three more plotters I'm not sure if I should pull them
> apart for parts or just junk them.
>
> Dave
> South Jersey

Discussion Thread

turbulatordude 2004-10-21 23:16:36 UTC HP plotter servo josef wagner 2004-10-21 23:36:03 UTC Re: [CAD_CAM_EDM_DRO] HP plotter servo Jon Elson 2004-10-22 09:01:10 UTC Re: [CAD_CAM_EDM_DRO] HP plotter servo turbulatordude 2004-10-22 09:31:35 UTC Re: HP plotter servo washcomp 2004-10-22 12:18:12 UTC Re: HP plotter servo Graham Stabler 2004-10-22 13:30:40 UTC Re: HP plotter servo volitan712003 2004-10-22 14:10:08 UTC Re: HP plotter servo learnningstuff 2004-10-22 16:16:46 UTC Re: HP plotter servo turbulatordude 2004-10-22 16:18:52 UTC Re: HP plotter servo Jeff Demand 2004-10-22 16:55:48 UTC Re: HP plotter servo Graham Stabler 2004-10-22 17:55:16 UTC Re: HP plotter servo Fred Smith 2004-10-22 20:30:44 UTC Re: HP plotter servo Mariss Freimanis 2004-10-22 23:27:16 UTC Re: HP plotter servo Jeff Jones 2004-10-23 01:35:19 UTC Re: [CAD_CAM_EDM_DRO] Re: HP plotter servo Mariss Freimanis 2004-10-23 01:46:31 UTC Re: HP plotter servo Graham Stabler 2004-10-23 07:47:33 UTC Re: HP plotter servo Jeff Jones 2004-10-23 10:25:13 UTC Re: [CAD_CAM_EDM_DRO] Re: HP plotter servo turbulatordude 2004-10-24 07:37:19 UTC Re: HP plotter servo turbulatordude 2004-10-24 07:48:23 UTC Re: HP plotter servo - schematics Hugh Prescott 2004-10-24 08:26:59 UTC Re: [CAD_CAM_EDM_DRO] Re: HP plotter servo - schematics turbulatordude 2004-10-25 20:39:14 UTC Re: HP plotter servo - schematics Don 2004-10-25 21:12:26 UTC Re: HP plotter servo turbulatordude 2004-10-25 22:38:58 UTC Re: HP plotter servo Don Rogers 2004-10-26 11:46:48 UTC Re: HP plotter servo