CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??

Posted by Dan Mauch
on 2004-11-03 09:28:34 UTC
I just thought of what is the voltage of your power supply? If it is over
50VDc then the caps I sent you wouldn't work because their voltage is to
low. You will need to buy some 100 V caps instead.
Dan
----- Original Message -----
From: "rogersmach" <rogersmach@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, November 03, 2004 9:02 AM
Subject: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??


>
>
> This question is actually for Dan Mauch, I thought I'd share it with
> the group for the info contained.
>
> Dan,
>
> I received the 470 uf 63 volt caps today for the Gecko 320's leads
> from the power supply. The gray band down one side of the body with
> slashes, is this the ground side? Polarity isn't clearly marked other
> than that. Anyone whom wishes to answer this would be appreciated.
>
> Thanks again for mailing me these at no charge, that was very nice of
> you. Hopefully this will protect my drives the next time the power
> company goes haywire.
>
> Ron
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

rogersmach 2004-11-03 09:03:59 UTC 470uf capacitor for Geckos,,,Polarity?? Dan Mauch 2004-11-03 09:26:19 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? Dan Mauch 2004-11-03 09:28:34 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? R Rogers 2004-11-03 09:48:23 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? Stephen Wille Padnos 2004-11-03 09:55:25 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? R Rogers 2004-11-03 10:07:12 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? Stephen Wille Padnos 2004-11-03 10:13:02 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? JanRwl@A... 2004-11-03 10:15:38 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? JanRwl@A... 2004-11-03 10:16:45 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? JanRwl@A... 2004-11-03 10:21:09 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? andyolney 2004-11-03 14:13:34 UTC Re: 470uf capacitor for Geckos,,,Polarity?? bryan b 2004-11-03 15:10:36 UTC Ballscrew adjustments, continued John D. Bussema 2004-11-03 18:49:54 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? Dan Mauch 2004-11-04 06:14:06 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? Dan Mauch 2004-11-04 09:15:59 UTC Re: [CAD_CAM_EDM_DRO] Re: 470uf capacitor for Geckos,,,Polarity?? R Rogers 2004-11-04 10:37:22 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? R Rogers 2004-11-04 10:40:41 UTC Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity?? andyolney 2004-11-04 12:32:48 UTC Re: 470uf capacitor for Geckos,,,Polarity??