Re: 470uf capacitor for Geckos,,,Polarity??

Dan - Your "up to 18 inchs long" sent me back to the manual since I
have more than 18 inches of wire to the power supply. The manual reads
"more than 18", so I am good to go. Thanks, Andy

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dan Mauch" <dmauch@s...> wrote:
> After rereading the G320 manual 1000 UF is the correct cap for wires
up to
> 18" long. 470 works fine on 12" long lines.
> You're fine
> Dan
> ----- Original Message -----
> From: "andyolney" <andy@o...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, November 03, 2004 9:59 AM
> Subject: [CAD_CAM_EDM_DRO] Re: 470uf capacitor for Geckos,,,Polarity??
>
>
> >
> >
> >
> > Dan - On this subject, I have installed 1000 uf 100v. Any clue if a
> > higher capacitance will screw things up?
> >
> > Andy
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> > timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to
be a
> > sister site to the CCED group, as many of the same members are
there, for
> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >