Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??

The Gecko manual for the G201 requires a 470 UF cap across term 1 and 2 if
the leads from the power supply cap are more than 12"
The G320 manual says that you should have a 1000 uf cap if the leads are
more than 18"
Dan

----- Original Message -----
From: "John D. Bussema" <bussema@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, November 03, 2004 6:49 PM
Subject: Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??


>
> Under what circumstances are these cap's suggested?
>
> -John
> ----- Original Message -----
> From: "rogersmach" <rogersmach@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, November 03, 2004 11:02 AM
> Subject: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??
>
>
>>
>>
>> This question is actually for Dan Mauch, I thought I'd share it with
>> the group for the info contained.
>>
>> Dan,
>>
>> I received the 470 uf 63 volt caps today for the Gecko 320's leads
>> from the power supply. The gray band down one side of the body with
>> slashes, is this the ground side? Polarity isn't clearly marked other
>> than that. Anyone whom wishes to answer this would be appreciated.
>>
>> Thanks again for mailing me these at no charge, that was very nice of
>> you. Hopefully this will protect my drives the next time the power
>> company goes haywire.
>>
>> Ron
>>
>>
>>
>>
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>> timg@...
>> Moderator: pentam@... indigo_red@... davemucha@...
>> [Moderators]
>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>> OFF Topic POSTS: General Machining
>> If you wish to post on unlimited OT subjects goto:
>> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>> if you have trouble.
>> http://www.metalworking.com/news_servers.html
>>
>> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>> sister site to the CCED group, as many of the same members are there, for
>> OT subjects, that are not allowed on the CCED list.
>>
>> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> bill
>> List Mom
>> List Owner
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>