Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??

Dan, thanks for the heads up on the Gecko 320 cap. 1000 uf and about 100 volt rating for my power supply putting out 64 volts.

Ron

Dan Mauch <dmauch@...> wrote:

The Gecko manual for the G201 requires a 470 UF cap across term 1 and 2 if
the leads from the power supply cap are more than 12"
The G320 manual says that you should have a 1000 uf cap if the leads are
more than 18"
Dan

----- Original Message -----
From: "John D. Bussema"
To:
Sent: Wednesday, November 03, 2004 6:49 PM
Subject: Re: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??


>
> Under what circumstances are these cap's suggested?
>
> -John
> ----- Original Message -----
> From: "rogersmach"
> To:
> Sent: Wednesday, November 03, 2004 11:02 AM
> Subject: [CAD_CAM_EDM_DRO] 470uf capacitor for Geckos,,,Polarity??
>
>
>>
>>
>> This question is actually for Dan Mauch, I thought I'd share it with
>> the group for the info contained.
>>
>> Dan,
>>
>> I received the 470 uf 63 volt caps today for the Gecko 320's leads
>> from the power supply. The gray band down one side of the body with
>> slashes, is this the ground side? Polarity isn't clearly marked other
>> than that. Anyone whom wishes to answer this would be appreciated.
>>
>> Thanks again for mailing me these at no charge, that was very nice of
>> you. Hopefully this will protect my drives the next time the power
>> company goes haywire.
>>
>> Ron
>>
>>
>>
>>
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>> timg@...
>> Moderator: pentam@... indigo_red@... davemucha@...
>> [Moderators]
>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>> OFF Topic POSTS: General Machining
>> If you wish to post on unlimited OT subjects goto:
>> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>> if you have trouble.
>> http://www.metalworking.com/news_servers.html
>>
>> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>> sister site to the CCED group, as many of the same members are there, for
>> OT subjects, that are not allowed on the CCED list.
>>
>> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> bill
>> List Mom
>> List Owner
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com/a

[Non-text portions of this message have been removed]