CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help...

Posted by R Rogers
on 2005-01-03 13:15:30 UTC
Stephen Wille Padnos <spadnos@...> wrote:

R Rogers wrote:

[snip]

>Encoder resolution? The G320 has a max pulse rate of 250 quadrature. Any resolution above 1000 CPR would require the G340 with step multiplier.
>
This isn't quite right.

The G320 and the G340 have the same internal limitation of 250KHz
(250,000 counts per second). Note that that's per second, not per
minute - this is 15 million pulses per minute. A 1000-CPR (4000 PPR in
quadrature) encoder can spin at 3750 RPM before you hit that speed limit.

///I originally had 1000 CPR encoders (4000 PPR) and was told by a very reliable source that their resolution was too high and would need the 340 instead and should stay below 250 quadrature for the 320. Thats what I remember but that may have been said due to the software being only capable of 45,000 Hz. pulse rate.

//////

The pulse multiplier doesn't increase the maximum rate that can be
achieved, it reduces the step rate necessary to achieve a particular
speed. That allows software based step generators (EMC, Mach2, Ah-Ha,
etc) to get faster speeds with their limited step output rates.
Something like Jon Elson's USC can output 300K step pulses per second,
so that wouldn't require a G340 even at full speed.

- Steve

[rest of thread snipped]


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links











---------------------------------
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search. Learn more.

[Non-text portions of this message have been removed]

Discussion Thread

mmurray701 2005-01-01 21:59:47 UTC Loosing position and need help... Joel 2005-01-02 06:38:20 UTC Re: Loosing position and need help... A. G. Eckstein 2005-01-02 06:48:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... Randy Wink 2005-01-02 07:54:27 UTC RE: [CAD_CAM_EDM_DRO] Loosing position and need help... R Rogers 2005-01-02 14:11:58 UTC Re: [CAD_CAM_EDM_DRO] Loosing position and need help... mmurray701 2005-01-02 19:23:13 UTC Re: Loosing position and need help... Jon Elson 2005-01-02 19:47:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... Gary 2005-01-03 00:20:04 UTC Re: Loosing position and need help... R Rogers 2005-01-03 06:44:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... A. G. Eckstein 2005-01-03 07:16:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... Stephen Wille Padnos 2005-01-03 07:47:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... R Rogers 2005-01-03 13:15:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... Torsten 2005-01-03 14:37:56 UTC Re: Loosing position and need help... Steve Stallings 2005-01-03 14:50:54 UTC Re: Loosing position and need help... David Paulson 2005-01-03 15:25:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... mmurray701 2005-01-03 19:23:58 UTC Re: Loosing position and need help... Jon Elson 2005-01-03 21:03:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help... Torsten 2005-01-04 01:50:18 UTC Re: Loosing position and need help... Henrik Olsson 2005-01-04 10:21:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help...