Re: [CAD_CAM_EDM_DRO] Re: Loosing position and need help...

It is a multiplier. The computer outputs 1 step and the multiplier
outputs to the servo board 10 steps (if it is set at 10). Each step is
equal to one encoder position. So in this example the motor would move
10 encoder positions for each 1 step generated by the computer. I do
not use the geckos, but the rutex board this step multiplier can be
selected as 1X, 4X, 10X and 20X

David

Torsten wrote:

>For a long time I was been very confused about
>the difference between a G320 and G340 so if
>I understand this right the G320 works with
>the encoder resolution as is and the G340 actualy
>divides this resolution to require lower pulse rates
>from the computer.
>Is the G340 adjustable for different division ratios?
>Why call this a multiplier when what it dose is divide?
>
>
>
>
>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/2004