CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Ball screws

on 2005-02-25 05:47:25 UTC
I've seen them advertised but really have no practical knowledge of
Kerks lead screw. Kerk actually makes lots of different lead screw
assemblies so I wouldn't be surprised if they had something new. A
talk with an applications engineer may help.

As to lead your CNC coftware would have to compensate in some manner or
form as even if the lead is constant the encoders and the gearing are
likely to be different form machine to machine. Not a user of mach2
either so specifics can't be offered at this time. Generally you have
a way to specify counts per inch/mm someplace within the software.

Thanks
dave


On Fri, 2005-02-25 at 01:31 +0000, ryan_kittredge wrote:
>
>
> Hello group;
> During some internet research I came across Kerk motion that has
> lead screws with anti backlash nuts that they claim to be less
> expensive and out perform real ball screws.
>
> I am interested if anyone knows anything about these and where good
> ball screw / lead screw suppliers are.
>
> I also noticed that a lot of ball screws do not have the
> standard .100" per rev lead that is the standard for the machines.
> Does the controller software like mach2 compensate for this?
>
> Thank you,
> Ryan
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Discussion Thread

tommy marantz 1999-11-10 18:05:32 UTC Ball screws Bob Bachman 1999-11-10 22:21:34 UTC Re: Ball screws William Scalione 1999-11-10 21:21:12 UTC Re: Ball screws Jon Elson 1999-11-10 23:30:01 UTC Re: Ball screws tommy marantz 1999-11-11 17:46:18 UTC Re: Ball screws tommy marantz 1999-11-11 17:50:07 UTC Re: Ball screws Jon Elson 1999-11-11 22:46:24 UTC Re: Re: Ball screws Matt Shaver 1999-11-11 23:47:40 UTC Re: Re: Ball screws Robert Bachman 1999-11-12 05:11:05 UTC Re: Re: Ball screws Larry Van Duyn 1999-11-12 05:50:43 UTC Re: Re: Ball screws Dan Mauch 1999-11-12 06:17:38 UTC Re: Re: Ball screws drew@x... 1999-11-12 09:09:37 UTC Re: Re: Ball screws Jon Elson 1999-11-12 10:56:29 UTC Re: Re: Ball screws F. de Beer 2000-02-16 04:05:15 UTC Ball screws Charles Hopkins 2000-02-16 07:29:14 UTC RE: Ball screws Darrell 2000-02-16 09:27:25 UTC Re: Ball screws stratton@m... 2000-02-16 19:02:24 UTC Re: Ball screws Jon Elson 2000-02-16 20:44:53 UTC Re: Ball screws Jon Anderson 2000-02-16 21:08:37 UTC Re: Ball screws Robert Douglass 2000-12-16 03:55:17 UTC Ball screws tbrooking@s... 2001-11-08 15:01:01 UTC Ball screws allan_r9@h... 2001-11-08 19:06:42 UTC Re: Ball screws tbrooking@s... 2001-11-09 05:18:06 UTC Re: Ball screws allan_r9@h... 2001-11-09 06:51:22 UTC Re: Ball screws tbrooking@s... 2001-11-09 14:56:05 UTC Re: Ball screws allan_r9@h... 2001-11-09 17:29:03 UTC Re: Ball screws ballendo@y... 2001-11-11 23:50:10 UTC B/S sizing was Re: Ball screws ballendo@y... 2001-11-11 23:56:26 UTC more B/S was Re: Ball screws Darrell Daniels 2001-11-12 00:15:35 UTC Re: [CAD_CAM_EDM_DRO] B/S sizing was Re: Ball screws ballendo@y... 2001-11-12 00:50:57 UTC Re: Ball screws ballendo@y... 2001-11-12 02:42:40 UTC B/S sizing was Re: Ball screws Jon Elson 2001-11-12 09:33:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws currinh@O... 2001-11-12 16:36:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws JanRwl@A... 2001-11-12 17:05:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws JanRwl@A... 2001-11-12 17:07:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws Jon Elson 2001-11-12 22:04:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws ballendo@y... 2001-11-13 15:49:07 UTC Re: updating to Ball screws ryan_kittredge 2005-02-24 18:24:29 UTC Ball screws Jon Elson 2005-02-24 19:20:02 UTC Re: [CAD_CAM_EDM_DRO] Ball screws David A. Frantz 2005-02-25 05:47:25 UTC Re: [CAD_CAM_EDM_DRO] Ball screws m0nkey0ne 2005-02-25 06:29:22 UTC Re: Ball screws turbulatordude 2005-02-25 06:41:20 UTC Re: Ball screws - software copensation Richard Garnish 2005-02-25 07:39:45 UTC Re: [CAD_CAM_EDM_DRO] Ball screws David A. Frantz 2005-02-25 17:33:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws hanson_whitey 2009-03-20 14:56:00 UTC Ball screws 2014-05-31 12:00:19 UTC Ball screws CS Mo 2014-05-31 12:33:46 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Rupert 2014-05-31 13:01:23 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-05-31 13:09:47 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Chuck - Go Nerds! 2014-05-31 13:36:52 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Jon Elson 2014-05-31 14:44:26 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Andy Wander 2014-05-31 22:21:34 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Hannu Venermo 2014-06-01 03:13:18 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-06-01 03:53:00 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Ron Thompson 2014-06-01 04:18:34 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-06-01 05:04:45 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Rupert 2014-06-01 05:50:50 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-06-01 06:07:00 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Andy Wander 2014-06-01 07:36:11 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Dave Halliday 2014-06-01 10:14:45 UTC RE: [CAD_CAM_EDM_DRO] Ball screws 2014-06-01 20:17:15 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Hannu Venermo 2014-06-03 10:26:10 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-06-03 17:04:30 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Gary Click 2014-06-05 07:34:57 UTC RE: [CAD_CAM_EDM_DRO] Ball screws 2014-06-07 10:36:15 UTC Re: Ball screws Hannu Venermo 2014-06-07 11:02:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws Tony Smith 2014-06-18 15:45:02 UTC RE: [CAD_CAM_EDM_DRO] Ball screws ronan hanlon 2014-07-03 07:22:17 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-07-04 09:07:16 UTC Re: [CAD_CAM_EDM_DRO] Ball screws