CAD CAM EDM DRO - Yahoo Group Archive

Re: Ball screws

Posted by m0nkey0ne
on 2005-02-25 06:29:22 UTC
And ... even if everybody's gearing was identical, you still have a
huge variation in resolution of steppers. This has to be compensated
for in software.
Randy

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "David A. Frantz"
<spinwizard@f...> wrote:
> I've seen them advertised but really have no practical knowledge of
> Kerks lead screw. Kerk actually makes lots of different lead screw
> assemblies so I wouldn't be surprised if they had something new.
A
> talk with an applications engineer may help.
>
> As to lead your CNC coftware would have to compensate in some
manner or
> form as even if the lead is constant the encoders and the gearing
are
> likely to be different form machine to machine. Not a user of
mach2
> either so specifics can't be offered at this time. Generally you
have
> a way to specify counts per inch/mm someplace within the software.
>
> Thanks
> dave
>
>
> On Fri, 2005-02-25 at 01:31 +0000, ryan_kittredge wrote:
> >
> >
> > Hello group;
> > During some internet research I came across Kerk motion that has
> > lead screws with anti backlash nuts that they claim to be less
> > expensive and out perform real ball screws.
> >
> > I am interested if anyone knows anything about these and where
good
> > ball screw / lead screw suppliers are.
> >
> > I also noticed that a lot of ball screws do not have the
> > standard .100" per rev lead that is the standard for the
machines.
> > Does the controller software like mach2 compensate for this?
> >
> > Thank you,
> > Ryan
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
[Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >

Discussion Thread

tommy marantz 1999-11-10 18:05:32 UTC Ball screws Bob Bachman 1999-11-10 22:21:34 UTC Re: Ball screws William Scalione 1999-11-10 21:21:12 UTC Re: Ball screws Jon Elson 1999-11-10 23:30:01 UTC Re: Ball screws tommy marantz 1999-11-11 17:46:18 UTC Re: Ball screws tommy marantz 1999-11-11 17:50:07 UTC Re: Ball screws Jon Elson 1999-11-11 22:46:24 UTC Re: Re: Ball screws Matt Shaver 1999-11-11 23:47:40 UTC Re: Re: Ball screws Robert Bachman 1999-11-12 05:11:05 UTC Re: Re: Ball screws Larry Van Duyn 1999-11-12 05:50:43 UTC Re: Re: Ball screws Dan Mauch 1999-11-12 06:17:38 UTC Re: Re: Ball screws drew@x... 1999-11-12 09:09:37 UTC Re: Re: Ball screws Jon Elson 1999-11-12 10:56:29 UTC Re: Re: Ball screws F. de Beer 2000-02-16 04:05:15 UTC Ball screws Charles Hopkins 2000-02-16 07:29:14 UTC RE: Ball screws Darrell 2000-02-16 09:27:25 UTC Re: Ball screws stratton@m... 2000-02-16 19:02:24 UTC Re: Ball screws Jon Elson 2000-02-16 20:44:53 UTC Re: Ball screws Jon Anderson 2000-02-16 21:08:37 UTC Re: Ball screws Robert Douglass 2000-12-16 03:55:17 UTC Ball screws tbrooking@s... 2001-11-08 15:01:01 UTC Ball screws allan_r9@h... 2001-11-08 19:06:42 UTC Re: Ball screws tbrooking@s... 2001-11-09 05:18:06 UTC Re: Ball screws allan_r9@h... 2001-11-09 06:51:22 UTC Re: Ball screws tbrooking@s... 2001-11-09 14:56:05 UTC Re: Ball screws allan_r9@h... 2001-11-09 17:29:03 UTC Re: Ball screws ballendo@y... 2001-11-11 23:50:10 UTC B/S sizing was Re: Ball screws ballendo@y... 2001-11-11 23:56:26 UTC more B/S was Re: Ball screws Darrell Daniels 2001-11-12 00:15:35 UTC Re: [CAD_CAM_EDM_DRO] B/S sizing was Re: Ball screws ballendo@y... 2001-11-12 00:50:57 UTC Re: Ball screws ballendo@y... 2001-11-12 02:42:40 UTC B/S sizing was Re: Ball screws Jon Elson 2001-11-12 09:33:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws currinh@O... 2001-11-12 16:36:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws JanRwl@A... 2001-11-12 17:05:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws JanRwl@A... 2001-11-12 17:07:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws Jon Elson 2001-11-12 22:04:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws ballendo@y... 2001-11-13 15:49:07 UTC Re: updating to Ball screws ryan_kittredge 2005-02-24 18:24:29 UTC Ball screws Jon Elson 2005-02-24 19:20:02 UTC Re: [CAD_CAM_EDM_DRO] Ball screws David A. Frantz 2005-02-25 05:47:25 UTC Re: [CAD_CAM_EDM_DRO] Ball screws m0nkey0ne 2005-02-25 06:29:22 UTC Re: Ball screws turbulatordude 2005-02-25 06:41:20 UTC Re: Ball screws - software copensation Richard Garnish 2005-02-25 07:39:45 UTC Re: [CAD_CAM_EDM_DRO] Ball screws David A. Frantz 2005-02-25 17:33:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws hanson_whitey 2009-03-20 14:56:00 UTC Ball screws 2014-05-31 12:00:19 UTC Ball screws CS Mo 2014-05-31 12:33:46 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Rupert 2014-05-31 13:01:23 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-05-31 13:09:47 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Chuck - Go Nerds! 2014-05-31 13:36:52 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Jon Elson 2014-05-31 14:44:26 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Andy Wander 2014-05-31 22:21:34 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Hannu Venermo 2014-06-01 03:13:18 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-06-01 03:53:00 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Ron Thompson 2014-06-01 04:18:34 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-06-01 05:04:45 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Rupert 2014-06-01 05:50:50 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Randall Wink 2014-06-01 06:07:00 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Andy Wander 2014-06-01 07:36:11 UTC RE: [CAD_CAM_EDM_DRO] Ball screws Dave Halliday 2014-06-01 10:14:45 UTC RE: [CAD_CAM_EDM_DRO] Ball screws 2014-06-01 20:17:15 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Hannu Venermo 2014-06-03 10:26:10 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-06-03 17:04:30 UTC Re: [CAD_CAM_EDM_DRO] Ball screws Gary Click 2014-06-05 07:34:57 UTC RE: [CAD_CAM_EDM_DRO] Ball screws 2014-06-07 10:36:15 UTC Re: Ball screws Hannu Venermo 2014-06-07 11:02:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws Tony Smith 2014-06-18 15:45:02 UTC RE: [CAD_CAM_EDM_DRO] Ball screws ronan hanlon 2014-07-03 07:22:17 UTC Re: [CAD_CAM_EDM_DRO] Ball screws 2014-07-04 09:07:16 UTC Re: [CAD_CAM_EDM_DRO] Ball screws