RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Posted by
Roger Hampson
on 2005-02-28 10:05:23 UTC
Hi Allan,
Over here in the UK we can obtain a specific steel bar that is centerless
ground to fine tolerances usually 0.5 thou 0.0005" that can be hardened by
heating to cherry red and quenching in water. this must be available all
over the world but most likely under a different name
It is available from Stubbs Sheffield, I do not know why it is called silver
steel as there is no silver in it
Like wise I do not know what "drill rod" is
It is however my insertion to build a router and to publish the design on my
web site as mentioned below
Roger
-----Original Message-----
From: deepcavity [mailto:deepcavity@...]
Sent: 28 February 2005 17:44
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Hi Roger, Please what is a silversteel bar?
Allan
Over here in the UK we can obtain a specific steel bar that is centerless
ground to fine tolerances usually 0.5 thou 0.0005" that can be hardened by
heating to cherry red and quenching in water. this must be available all
over the world but most likely under a different name
It is available from Stubbs Sheffield, I do not know why it is called silver
steel as there is no silver in it
Like wise I do not know what "drill rod" is
It is however my insertion to build a router and to publish the design on my
web site as mentioned below
Roger
-----Original Message-----
From: deepcavity [mailto:deepcavity@...]
Sent: 28 February 2005 17:44
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Hi Roger, Please what is a silversteel bar?
Allan
----- Original Message -----
From: "Roger Hampson" <r_.hampson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, February 27, 2005 6:44 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
>
> I too am beginning to build a machine using 1 inch silver steel bar but I
am
> also using recirculating ball bushings, as well as casting the majority of
> "fixings" myself from aluminium, it is an up hill struggle
> if any one is interested look at www.foundry-fopars.co.uk
>
> New to the group
>
>
> Roger
>
> -----Original Message-----
> From: Ron Ginger [mailto:ronginger@...]
> Sent: 27 February 2005 13:40
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
>
>
>
> >will 1 inch drill rod with oilite bearing work good for linear ways?
>
> You have two intersting words here- 'work' and 'good'
>
> Sure, you can make a machine work on drill rod and bushings. The drill
> rod is not really round, the bushings will have slop in them (if not,
> they wont slide) But you can make a workable machine.
>
> Good is another question, and a VERY subjective one. If you want to cut
> out simple parts, like balsa wood for models, it might be fine. If you
> want to make steel 3D molds, its not likely to be 'good'
>
> ron ginger
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
edward c heil
2005-02-26 21:01:15 UTC
DRILL ROD FOR LINEAR WAYS
Ron Ginger
2005-02-27 05:39:16 UTC
Re:DRILL ROD FOR LINEAR WAYS
Roger Hampson
2005-02-27 06:45:46 UTC
RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
R Rogers
2005-02-27 07:29:07 UTC
Re: [CAD_CAM_EDM_DRO] DRILL ROD FOR LINEAR WAYS
deepcavity
2005-02-28 09:48:05 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Tony Jeffree
2005-02-28 09:59:37 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Roger Hampson
2005-02-28 10:05:23 UTC
RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Les Newell
2005-02-28 10:23:17 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Roger Hampson
2005-02-28 11:07:45 UTC
RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Randy Gordon-Gilmore
2005-02-28 11:59:11 UTC
Alumin(i)um question for UK members
turbulatordude
2005-02-28 12:43:28 UTC
Re:DRILL ROD FOR LINEAR WAYS
Roger Hampson
2005-02-28 12:54:06 UTC
RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
turbulatordude
2005-02-28 12:59:41 UTC
Re: Alumin(i)um question for UK members
Polaraligned
2005-02-28 13:51:21 UTC
Re:DRILL ROD FOR LINEAR WAYS
Bruce Pigeon
2005-02-28 16:30:27 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
deepcavity
2005-02-28 17:20:20 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Brian
2005-02-28 17:48:07 UTC
Re: [CAD_CAM_EDM_DRO] Alumin(i)um question for UK members
Bill Vance
2005-02-28 19:00:11 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
edwinkraemer
2005-02-28 21:13:28 UTC
Re: Alumin(i)um question for UK members
deepcavity
2005-02-28 22:11:03 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
Bruce Pigeon
2005-03-01 04:31:46 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
r_.hampson@t...
2005-03-01 04:40:52 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
turbulatordude
2005-03-01 06:33:19 UTC
Re: Alumin(i)um question for UK members
Bruce Pigeon
2005-03-01 07:02:13 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
cnc_4_me
2005-03-01 12:11:36 UTC
Re:DRILL ROD FOR LINEAR WAYS
Roger Hampson
2005-03-01 13:03:39 UTC
RE: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS
George Taylor, IV
2005-03-01 13:56:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Alumin(i)um question for UK members
R Rogers
2005-03-01 14:41:29 UTC
Re: [CAD_CAM_EDM_DRO] Re:DRILL ROD FOR LINEAR WAYS