CAD CAM EDM DRO - Yahoo Group Archive

Re: Help, continuing to burn drives

Posted by Keith Clark
on 2005-04-03 23:05:04 UTC
Ron,

I have done the same start up routine, computer, mach2, power to
machine which powers up the Campbell breakout board, then plug in
the DC powersupply, then hit reset button in Mach2 which turns on
the relay to send power to the Geckos. Only problem is the relay is
on the DC side instead of the AC side of the power. I am hoping
that is my problem.

Thanks
Keith

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Ron Kline <godsone@e...>
wrote:
> No , can't be the problem at least with mine as I start the
computer
> then Mach 3 after it is loaded I start the 5 volt logic power and
then
> last of all the main power supply .
> I'm using the Axxus board in all my machines .
>
> Ron
>
> Robert Campbell wrote:
>

Discussion Thread

Keith Clark 2005-04-03 12:08:19 UTC Help, continuing to burn drives Peter Reilley 2005-04-03 12:38:56 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Dhiren Shah 2005-04-03 12:49:36 UTC RE: [CAD_CAM_EDM_DRO] Help, continuing to burn drives R Rogers 2005-04-03 13:11:39 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Ron Kline 2005-04-03 13:49:26 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Jeff Goldberg 2005-04-03 14:19:09 UTC RE: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Les Newell 2005-04-03 14:22:32 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Robert Campbell 2005-04-03 14:38:43 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Jon Elson 2005-04-03 15:53:18 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Keith Clark 2005-04-03 15:54:42 UTC Re: Help, continuing to burn drives Ron Kline 2005-04-03 16:45:31 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives garageboy21 2005-04-03 17:43:47 UTC Re: Help, continuing to burn drives Keith Clark 2005-04-03 23:01:56 UTC Re: Help, continuing to burn drives Keith Clark 2005-04-03 23:05:04 UTC Re: Help, continuing to burn drives JanRwl@A... 2005-04-03 23:09:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Help, continuing to burn drives Dan Mauch 2005-04-04 06:30:43 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Dan Mauch 2005-04-04 06:43:21 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Ron Kline 2005-04-04 06:45:39 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives R Rogers 2005-04-04 07:23:14 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives Jon Elson 2005-04-04 09:47:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Help, continuing to burn drives Keith Clark 2005-04-04 10:03:23 UTC Re: Help, continuing to burn drives Keith Clark 2005-04-04 10:10:10 UTC Re: Help, continuing to burn drives washcomp 2005-04-04 10:15:54 UTC Re: Help, continuing to burn drives Ron Kline 2005-06-04 08:23:49 UTC Re: [CAD_CAM_EDM_DRO] Help, continuing to burn drives